Shure FP16A - Manual

Model FP16A Distribution Amplifier
User Guide
© 2004, Shure Incorporated
27A8725 (Rev. 3)
Printed in U.S.A.
GENERAL DESCRIPTION
The FP16A is a 1-input, 6-output, compact, self-contained audio distribution amplifier for routing multiple audio signal feeds
without incurring loss, distortion, hum or noise. The intelligent design, reliable components and meticulous construction of
the FP16A make it the optimum choice for broadcast stations—AM, FM, or TV, studios or ENG vans—as well as recording
studios, duplicating houses, and telecommunications and production facilities.
FEATURES
• Wide-range audio frequency response
• Up to 90 dB gain
• Low noise, hum and distortion
• Protected against damage from input overload and
shorted outputs; protected against RFI and
mechanically protected against incorrect battery
insertion
• Transformer-coupled XLR input connector is
switchable to low-impedance microphone or line
level
• Phantom power for condenser microphones
available at input
• Six isolated, transformer-coupled XLR outputs are
switchable to low-impedance balanced microphone
or 600-ohm balanced line level
• Link input and output jacks permit "ganging" of
FP16s for additional outputs, or adding external
equipment such as equalizers, compressors or
limiters
• Recessed input gain control with normal and
overload LED indicators
• Recessed individual output channel gain controls
• Powered by AC (120 or 240V-internally selectable)
or built-in battery pack
• Low battery drain provides more than 15 hours
operation under normal operating conditions
• Noiseless and automatic switchover to and from
battery power
• Rugged and durable construction
• Compact and lightweight for field use and
transportation
• Reliable operation over wide temperature and
humidity extremes
• Rack-mountable with accessory rack mount kit