Icom IC-F610 - Manual (Page 29)

24
8
CONNECTION AND MAINTENANCE
qANTENNA CONNECTOR
Connects to an antenna. Ask your Dealer about antenna
selection and placement.
wMICROPHONE HANGER
Connect the supplied microphone hanger to the vehicle’s
ground for microphone on/off hook functions.
eDC POWER RECEPTACLE
Connects to a 12 V DC battery. Pay attention to polari-
ties.
NEVER connect to a 24 V battery. This could dam-
age the transceiver.
rEXTERNAL SPEAKER JACK
Connect a 4–8 Ω external speaker, if desired.
tOPTIONAL CABLE (OPC-617 or OPC-822)
Connect an external horn drive unit, LCD backlight con-
trol, etc.
■Supplied Accessories
q Microphone ...................... 1
w Microphone hanger and
screw set ..................... 1 set
e Microphone hanger cable . 1
r DC power cable
(OPC-345) ..........................1
t Mounting bracket .............. 1
y Bracket bolts ..................... 4
u Mounting screws (M5
×12) . 4
i Self-tapping screws
(M5 ×20) ............................. 4
o Flat washers ...................... 4
!0 Spring washers ................. 4
!1 Nuts ................................... 4
!2 Fuses (15 A) ...................... 2
!3 Function name stickers*
( 1705 LCD SEAL(E)) .............. 1
*Function name stickers
There are no names on the programmable function keys since the
necessary functions can be assigned to these keys.
Attach the supplied function name stickers above the appropriate
keys.
q w e r
t y
u
i
o !0 !1 !2
!3
LCD-STICKER
IC OM
IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 29 (1,1)