Icom IC-F610 User Manual

Page 22

OTHER FUNCTION

D Scrambler function

The transceiver is compatible with the optional UT-109
(#02)* scrambler unit.
➥Pre-programmed 5 scrambler code can be selected in

the User Setup Menu. (p. 19)

NOTE: UT-109 is recommended for trunking operation. Both

UT-110 and UT-109 are recommended for conven-
tional operation.

D Compander function

The compander function provides clear audio quality in
noisy environments. (p. 19)

D Mic Hook OFF function

This function allows you to answer back when receiving the
individual call.
➥Select ‘Answer (ANS)’ in ‘HooK’ in the User Setup menu.

(p. 19)

D Mic Hook ON function

This function activates to clear down at the end of the con-
versation. (p. 19)
➥Select ‘Clear (CLR)’ in ‘HooK’ in the User Setup menu.

NOTE: Select ‘ON’ on the ‘HooK’ in the User Setup menu

when you use both ‘ANS’ and ‘CLR’.

D Horn Honk function

(optional OPC-617 is required)

The Horn Honk function enables you to turn Horn Honk ON
for a fixed period when receiving a status call or ‘ALERT-
ING’ is displayed during an individual call.
➥Select ‘ON’ in ‘Horn’ in the User Setup menu. (p. 19)

D Public Address function

(optional OPC-617 is

required)

While pushing and holding [PTT] on the microphone, you
can use the transceiver as an audio amplifier. External
audio amplifier and speaker are required.

IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 22 (1,1)