Operation, Turning power on – Icom IC-F610 User Manual
Page 10

5
2
OPERATION
■Turning power ON
q Push
to turn the power ON.
• A power-up alert tone sounds for about 1 sec. and an
opening message may appear.
w If the transceiver is programmed for a start up passcode,
input the digit codes as directed by your dealer.
• The keys in the table below can be used for password
input.
• The transceiver detects numbers in the same block as
identical. Therefore “01234” and “56789” are the same.
e When the “PASSWORD” indication does not clear after
inputting digit codes, the input code number may be incor-
rect. Turn the power off and start over in this case.
KEY
[P
0
]
[P
1
]
[P
2
]
[P
3
]
[P
4
]
NUMBER
0
1
2
3
4
5
6
7
8
9
IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 10 (1,1)