Map27, Map27 serial interface – Icom IC-F610 User Manual
Page 25

20
6
MAP27
‘
‘ MAP27 serial interface
MAP27 is a Mobile Access Protocol for MPT1327/1343 com-
munication equipment. It permits data exchange between
MPT radio equipment and external equipment such as a data
terminal which may be a laptop computer.
By connecting the OPC-822
OPTIONAL INTERFACE CABLE
to the
external connector of the transceiver (J9), you can use the
serial interface*. (See right.)
*Available baud rate: 1200/2400/4800/9600
Using the appropriate PC software, you can control dialling,
hook off (answer), hook on (clear down), status and short
data from the computer.
The interface supports the following functions.
• Independent Call, Group Call
• Emergency Call (call with “
✱9”)
• Clear down
• Send/receive status messages
• Send/receive SDM (Short Data Message): up to 100
ASCII characters
NOTE: Follow the instruction manuals of MAP27 equip-
ment for operation.
OPC-822
J9
• OPC-822 (OPTION) installation
IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 25 (1,1)