beautypg.com

Receiving, Receiving a call – Icom IC-F610 User Manual

Page 18

background image

13

3

RECEIVING

Receiving a call

D

D Reception of an individual call

When an individual call is received, the telephone beep
sounds telling you that a call has been received.
Immediately after this, you can talk with the caller.

q The caller’s individual code and count-down timer will

appear on the LCD screen.

➥If the call is from a telephone (PSTN call) or PABX

(PABX call) will be displayed.

w Pushing [PTT] will allow you to talk with the caller. The

transmission indicator

will appear on the LCD.

e During the communication, the timer will count the com-

munication time. When the limit has been reached, the
communication will be automatically shut down (clear
down).

r To end the communication manually, push [Clear] or

push [

✱] then [#].

t The transceiver will return to the waiting mode.

• If you do not answer the call;

y If you did not answer the call by not push [PTT], the

caller’s number is stored in the Call Back memory. Up
to 15 non-answered calls are stored. If there is any non-
answered call remaining in the memory, the Call Back
icon blinks.

u Select the Call Back memory by pushing [Call Back] and

[

]/[

], then push [PTT]. This will allow you to call the

stored unanswered call.

D

D Reception of a Group Call;

You can receive a group call with a pre-programmed group
code number or the group code that has been selected via
[

]/[

].

When a group call is received, the beep sound is emitted
and you immediately are able to communicate.
q The LCD screen displays the caller’s individual code.

302

ALERTING

TIME 4 56

TELEPHONE

PABX

ALERTING

ALERTING

Q1 302

GROUP 200

*Message and

individual code
displayed alter-
nately.

IC-F610_MPT-2.qxd 05.5.10 1:00 PM Page 18 (1,1)