Ingersoll-Rand NIRVANA IRN75-160K-2S - Manual (Page 70)

IRN37 - 160K - CC & IRN50 - 200H -CC & IRN75 - 160K - 2S & IRN100 - 200H - 2S & IRN 250 - 300H - 2S
http://air.irco.com
6
9.0 OPERATING INSTRUCTIONS
9.3 DISPLAY SCREEN
The display screen is divided into three functional areas, as seen in
the typical CURRENT STATUS screen shown here.
The left side continuously shows the package discharge pressure
in large numbers with the line directly below showing the running
condition of the machine
100 PSI
READY TO START
− CURRENT STATUS −
PACKAGE DISCHARGE
TEMP
102° F
AIREND DISCHARGE
TEMP
192° F
MAIN MENU
The right side shows various items or lists such as the machine’s
CURRENT STATUS readings, the MAIN MENU, the OPERATOR
SETPOINTS list, etc. Any of the lists can be moved up or down by
pressing the arrow buttons to the right of the screen. The small
arrow(s) displayed in the upper right corner of the screen indicate
when you can move up and/or down through a list. The arrow
buttons are also used to change an individual item’s value. At
certain times, items and/or their values are “highlighted”. This means
that they are displayed as light characters on a dark background.
The bottom of the screen is divided into thirds with the words in
each small box showing the function of the button directly beneath
it. The words will change in these boxes depending on what
actions are permitted at any particular time. The action resulting
from pressing each of these buttons is indicated in the Operator
Panel Flow Diagram later in this section. This can be used as a quick
reference of how to step the controller screen through any desired
function.