IBM SG24-4576-00 - Manual (Page 150)

18. Specify the path where the AUTOEXEC.BAT file is located or press Enter to
accept the default. The default is C:AUTOEXEC.BAT.
A screen like the one in Figure 92 will appear.
Figure 92. Disk Driver Options
19. Select a disk driver.
If the driver that you need is not in the list, insert the disk driver diskette
appropriate for your adapter and press the Insert key.
A screen like the one in Figure 93 will appear.
Figure 93. Network Driver Options
20. Select a network driver.
If the driver that you need is not in the list, insert the LAN driver diskette
appropriate for your adapter and press the Insert key.
21. Verify the drivers you have selected and select Continue Installation.
22. Assign a network number for the LAN adapter card(s) in your server. This
number is used in the bind IPX statement. Press Enter to accept a random
network number.
Chapter 4. Novell NetWare Installation
137