IBM SG24-4576-00 - Manual (Page 145)

30. Place the cursor on the status field and press Enter. A screen like the one in
Figure 86 on page 132 will appear.
Figure 86. Volume Status
31. Select Mount Volume and then press Enter.
32. Press Esc to return to the Installation Options menu.
33. Select System Options.
34. Select Copy System and Public Files and press Enter. A screen like the one
in Figure 87 will appear.
Figure 87. Copy System and Public Files
The system will prompt you to insert some diskettes. The diskettes contain
files which make all the NetWare commands and utilities available. When
the system is finished copying all the files, you will return to the Installation
Options menu.
35. Press Alt + Esc to leave the installation module in memory and return to the
system console prompt.
36. Load the LAN driver at the prompt.
132
NetWare Integration Guide