Raw printing – Intellinet Network Solutions 509077 User Manual

Page 44

14. You have successfully added the network printer to the PC. The information for

the printer is displayed on the screen. Click “Finish.”

NOTE: In Windows Vista, you need to close the “Bi-directional” function for

better compatibility with some printers. on the desktop, go to Start and Settings,

then select “Printers.” on the Printers screen, right-click the printer and select

“Properties.” on the Properties screen, disable the bi-directional support.

7. raW Printing

RAW printing allows users to connect to printers via TCP/IP for print sharing. A

computer with a Windows 2000/XP/Server 200 operating system can use the

protocol to share printing on the network. The MFP server can support RAW

printing by default.
To configure the RAW setting in Windows 2000/XP/Server 2003, follow the steps

below. Note that the following procedures and screen samples are representative

of Windows XP. For Windows 2000/Server 200, the procedures are similar.

1. on the desktop, go to Start, then Settings. Select “Printers and Faxes.”

2. Click “Add a Printer.”

RAW PRINTING