5 system tools – Intellinet Network Solutions 509077 User Manual

Page 37

You can configure the MFP Server to automatically get an IP address from the

dHCP server or manually specify a static IP address.
If you need the MFP server to automatically get an IP address from a dHCP server,

select “enable obtain TCP/IP Settings Automatically (Use dHCP/ BooTP).” You

also can select “disable Use the following TCP/IP Settings” to manually assign an

IP address, subnet mask and gateway for the MFP server.

5.4.4 Save Settings

After configuring the MFP server, click “Save Settings” to save the settings and re-

start the system.

5.5 System tools

5.5.1 load default

You can use this screen to restore the factory default settings. NOTE: All of your

previous setting will be cleared.

WEB MANAGEMENT