Intellinet Network Solutions 509077 - Manual (Page 26)

You can select “64 bit” or “128 bit” length and “Hexadecimal” or “ASCII” format for
the encryption key. A longer key length can provide stronger security, but lower the
communication performance.
PassPhrase: This entry simplifies the WEP encryption process by automatically
generating the WeP encryption keys for the MFP server. This setting is only
valid when the security mode is in “WeP(HeX).”
Key 1 to Key 4: enter four key values by following the rules below and select one
key as the default key.
• If the key length is 64-bit, enter 10-digit Hex values or 5-digit ASCII values as
the encryption keys. For example: “012456aef” or “Guest.”
• If the key length is 128-bit, enter 26-digit Hex values or 1-digit ASCII values
as the encryption keys. For example: “012456789012456789abcdef” or
“administrator.”
26
SERVER CONFIGURATION