Intermec PB50 User Manual
Page 23

Chapter 1 — Using the PB50 Mobile Label and Receipt Printer
PB50 Mobile Label and Receipt Printer User’s Guide
13
5
Close the media cover until it latches. The printer emits the
hardware sound to tell you that the media door closed correctly.
6
Press down on the self-strip door to make sure the media cover is
completely latched.
7
Press and hold the
Feed button for more than two seconds to
calibrate the media.
Note: The linerless printer does not have a self-strip door. Instead,
the self-strip door is molded plastic and part of the media cover.