Inter-Tel SoftPhone 8601 - Manual (Page 24)

18 Inter-Tel ® Model 8601 SoftPhone for Pocket PC User Guide
Using Hot Dial
The Model 8601 supports the Hot Dial feature. When Hot Dial is enabled ( ), the
endpoint automatically sends the dialed number if the number matches the dial plan.
If Hot Dial is disabled (
), you must tap TALK to send the number.
To turn on/off the Hot Dial feature: Tap the Hot Dial icon. The icon changes to
reflect the current setting.
Making and Receiving Calls
Making and receiving calls is the basic purpose of any endpoint. With your Model
8601, you can make/receive intercom and outside calls, and make emergency calls.
Making Calls
To place an intercom call: Enter an extension number on the dialpad or type the
number directly on the soft keyboard.
To place an outgoing call: Tap
(the feature code for outgoing access) followed by
the outside number on the dialpad or type the number directly on the soft keyboard.
To make an emergency call: Tap
.
To call an attendant: Tap .
Receiving Calls
When the Model 8601 receives a call, you hear a ring sound, and the endpoint dis-
plays an incoming call notification.
To answer a call: Tap
ANSWER from the notify message or tap TALK (the TALK
icon appears when the notification message is minimized) .
To ignore a call: Tap IGNORE from the notify message.
Switching Between Two Calls
The Model 8601 can establish up to two simultaneous calls. If the second incoming
call is answered, the first call is placed on hold, and you are connected with the sec-
ond caller. The Model 8601 then presents a
SWAP button on the display that allows
you to toggle back and forth between calls.
To switch between calls: Tap
SWAP .
Ending Calls
While you are on a call, the END icon appears on the display.
To end a call: Tap END.
8
9 1 1
0