Stovax STUDIO 8700CFCHEC - Manual (Page 26)

26
SERVICING INSTRUCTIONS
REPLACING PARTS
4. GLASS WINDOW
4.1 Remove the two clips and brackets from either side of the
frame, Diagram 5
5
AR1864
• Lift the glass clear from the lock bracket at the top of the
frame and slide out
5. BLACk ENAMELLED PANELS
5.1 Hold the rear panel while sliding the side panels forward
until clear of the appliance, Diagram 6
6
AR1865
• Lift the bottom panel out of the appliance
• Lift the panel from the appliance
5.2 • Lean the top of the rear panel forward and lift off the
support rail
5.3 To reassemble the panels in reverse order:
• At an angle, slide the bottom of the back panel into
place before the top edge is pushed back
• Replace the lower panel
• Replace the side panels
• Replace the side panels
6. MAIN BURNER
6.1 To replace the main burner:
• Remove the stone pebbles from the burner (optional)
• Remove the burner securing screw from the left side of
the burner, Diagram 7
7
AR1965
• Slide the burner fully to the left
• Lift the right side clear of the pilot, Diagram 8
8
AR1868
• Slide the burner to the right and out of its location
• Refit in reverse order
When refilling the stone pebbles, fill to the rim of the
burner tray and flatten until level.
Ensure no stone pebbles fall into the pilot area.