Document Outline

• DK-A10 EN 01-30.fm .pdf
  • Important Instruction
    • Important Instruction
    • SPECIAL NOTES
    • Important Instruction
    • IMPORTANT SAFETY INSTRUCTIONS
    • Important Instruction
    • IMPORTANT SAFETY INSTRUCTIONS (continued)
      • IMPORTANT SAFETY INSTRUCTIONS (continued)
    • General Information
    • Special Note
      • Supply of this product does not convey a license nor imply any right to distribute content create...
      • MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
    • Contents
      • Page
        • Page
          • Page
      • n General Information
        • Precautions 6
          • Precautions 6
            • Precautions 6
        • Controls and indicators 7 - 9
          • Controls and indicators 7 - 9
            • Controls and indicators 7 - 9
      • n Preparation for Use
        • System connections 10
          • System connections 10
            • System connections 10
        • Remote control 11
          • Remote control 11
            • Remote control 11
      • n Basic Operation
        • General control 12
          • General control 12
            • General control 12
        • Setting the clock 13
          • Setting the clock 13
            • Setting the clock 13
      • n iPod
        • Listening to the iPod 14 - 16
          • Listening to the iPod 14 - 16
            • Listening to the iPod 14 - 16
      • n CD or MP3/WMA disc Playback
        • Listening to a CD or MP3/WMA disc 17 - 18
          • Listening to a CD or MP3/WMA disc 17 - 18
            • Listening to a CD or MP3/WMA disc 17 - 18
        • Advanced CD or MP3/WMA disc playback 19 - 20
          • Advanced CD or MP3/WMA disc playback 19 - 20
            • Advanced CD or MP3/WMA disc playback 19 - 20
        • MP3/
          • MP3/
      • n Radio
        • Listening to the radio 23 - 24
          • Listening to the radio 23 - 24
            • Listening to the radio 23 - 24
      • n Advanced Features
        • Alarm and sleep operation 25 - 26
          • Alarm and sleep operation 25 - 26
            • Alarm and sleep operation 25 - 26
        • Enhancing your system 27
          • Enhancing your system 27
            • Enhancing your system 27
      • n References
        • Troubleshooting chart 28 - 29
          • Troubleshooting chart 28 - 29
            • Troubleshooting chart 28 - 29
        • Maintenance 29
          • Maintenance 29
            • Maintenance 29
        • Specifications 29
          • Specifications 29
            • Specifications 29
        • CONSUMER LIMITED WARRANTY Back cover
          • CONSUMER LIMITED WARRANTY Back cover
            • CONSUMER LIMITED WARRANTY Back cover
    • General Information
    • Precautions
      • n General
        • • l Use the unit on a firm, level surface free from vibration.
            • l Use the unit on a firm, level surface free from vibration.
          • l Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and e...
            • l Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and e...
          l Do not place anything on top of the unit.

          • l Do not place anything on top of the unit.
            • l Do not place anything on top of the unit.
              • l Do not place anything on top of the unit.
          l Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely lo...

          • l Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely lo...
            • l Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely lo...
              • l Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely lo...
          l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...

          • l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...
            • l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...
              • l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...
          • l In case of an electrical storm, unplug the unit for safety.
            • l In case of an electrical storm, unplug the unit for safety.
          • l Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can...
            • l Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can...
            • l The AC power plug is used as disconnect device and shall always remain readily operable.
          • l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...
            • l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...
              • l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...
          l This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C).

          • l This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C).
            • l This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C).
              • l This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C).
          • The voltage used must be the same as that specified on this unit. Using this product with a highe...
          n Volume control

          • The sound level at a given volume setting depends on speaker efficiency, location and various oth...
          General Information
          Controls and indicators

          • n Top panel
            • Reference page
              • Reference page
                • Reference page
            • 1. iPod Terminal 15
              • 1. iPod Terminal 15
                • 1. iPod Terminal 15
            • 2.
              • 2.
                • 2.
            • 3. Clock Button 13
              • 3. Clock Button 13
                • 3. Clock Button 13
            • 4. iPod Button 14
              • 4. iPod Button 14
                • 4. iPod Button 14
            • 5. Remote Sensor 11
              • 5. Remote Sensor 11
                • 5. Remote Sensor 11
            • 6. CD Button 17
              • 6. CD Button 17
            • 7. Auxiliary Button 27
              • 7. Auxiliary Button 27
                • 7. Auxiliary Button 27
            • 8. Snooze/Dimmer Button 12, 25
              • 8. Snooze/Dimmer Button 12, 25
                • 8. Snooze/Dimmer Button 12, 25
            • 9. Tuner Button 23
              • 9. Tuner Button 23
                • 9. Tuner Button 23
            • 10. CD Eject Button 18
              • 10. CD Eject Button 18
            • 11. Alarm Indicator 25
              • 11. Alarm Indicator 25
                • 11. Alarm Indicator 25
            • 12. Alarm Button 25
              • 12. Alarm Button 25
                • 12. Alarm Button 25
            • 13. Alarm ON/OFF Button 25
              • 13. Alarm ON/OFF Button 25
                • 13. Alarm ON/OFF Button 25
            • 14. E Sound Button 10, 12
              • 14. E Sound Button 10, 12
                • 14. E Sound Button 10, 12
            • 15. Play/Pause Button 16, 18
              • 15. Play/Pause Button 16, 18
                • 15. Play/Pause Button 16, 18
            • 16. Skip Down, Tuner Preset Down Button 13, 16, 18, 24
              • 16. Skip Down, Tuner Preset Down Button 13, 16, 18, 24
                • 16. Skip Down, Tuner Preset Down Button 13, 16, 18, 24
            • 17. Skip Up, Tuner Preset Up Button 13, 16, 18, 24
              • 17. Skip Up, Tuner Preset Up Button 13, 16, 18, 24
                • 17. Skip Up, Tuner Preset Up Button 13, 16, 18, 24
            • 18. Stop Button 12
              • 18. Stop Button 12
                • 18. Stop Button 12
            • 19. Volume Down Button 12
              • 19. Volume Down Button 12
                • 19. Volume Down Button 12
            • 20. Volume Up Button 12
              • 20. Volume Up Button 12
          General Information
          Controls and indicators (continued)

          • n Display
            • Reference page
              • Reference page
                • Reference page
            • 1. Alarm Indicator 25
              • 1. Alarm Indicator 25
                • 1. Alarm Indicator 25
            • 2. Sleep Indicator 26
              • 2. Sleep Indicator 26
                • 2. Sleep Indicator 26
            • 3. MP3 Indicator 18
              • 3. MP3 Indicator 18
                • 3. MP3 Indicator 18
            • 4. WMA Indicator 18
              • 4. WMA Indicator 18
                • 4. WMA Indicator 18
            • 5. FOLD Indicator 22
              • 5. FOLD Indicator 22
                • 5. FOLD Indicator 22
            • 6. CD Indicator 18
              • 6. CD Indicator 18
                • 6. CD Indicator 18
            • 7. iPod Indicator 14
              • 7. iPod Indicator 14
                • 7. iPod Indicator 14
            • 8. Aux Indicator 27
              • 8. Aux Indicator 27
                • 8. Aux Indicator 27
            • 9. FM Stereo Mode Indicator 23
              • 9. FM Stereo Mode Indicator 23
                • 9. FM Stereo Mode Indicator 23
            • 10. FM Stereo Receiving Indicator 23
              • 10. FM Stereo Receiving Indicator 23
                • 10. FM Stereo Receiving Indicator 23
            • 11. Total Indicator 18, 22
              • 11. Total Indicator 18, 22
                • 11. Total Indicator 18, 22
            • 12. Random Indicator 19
              • 12. Random Indicator 19
                • 12. Random Indicator 19
            • 13. Summer Indicator 13
              • 13. Summer Indicator 13
                • 13. Summer Indicator 13
            • 14. Pause Indicator 16, 18
              • 14. Pause Indicator 16, 18
                • 14. Pause Indicator 16, 18
            • 15. Memory Indicator 20
              • 15. Memory Indicator 20
                • 15. Memory Indicator 20
            • 16. Repeat Play Indicator 19
              • 16. Repeat Play Indicator 19
                • 16. Repeat Play Indicator 19
            • 17. Play Indicator 18
              • 17. Play Indicator 18
                • 17. Play Indicator 18
          • n Rear panel
            • Reference page
              • Reference page
                • Reference page
            • 1. FM 75 Ohms Antenna Jack 10
              • 1. FM 75 Ohms Antenna Jack 10
                • 1. FM 75 Ohms Antenna Jack 10
              • 2. AM Antenna Ground Terminal 10
                • 2. AM Antenna Ground Terminal 10
              • 3. Summer Time Switch 13
                • 3. Summer Time Switch 13
              • 4. AM Loop Antenna Terminal 10
                • 4. AM Loop Antenna Terminal 10
              • 5. Video Out Jack 27
                • 5. Video Out Jack 27
              • 6. Auxiliary Input Jacks 27
                • 6. Auxiliary Input Jacks 27
              • 7. Headphone Jack 27
                • 7. Headphone Jack 27
              • 8. AC Input Jack 10
                • 8. AC Input Jack 10
          General Information

          • n Remote control
            • Reference page
              • Reference page
                • Reference page
            • 1. Remote Control Transmitter 11
              • 1. Remote Control Transmitter 11
            • 2. Function Button 16
              • 2. Function Button 16
                • 2. Function Button 16
            • 3. On/Stand-by Button 11, 12, 23
              • 3. On/Stand-by Button 11, 12, 23
            • 4. Volume Up and Down Buttons 12
              • 4. Volume Up and Down Buttons 12
            • 5. Skip Down, Tuner Preset Down Button 13, 16, 18, 24
              • 5. Skip Down, Tuner Preset Down Button 13, 16, 18, 24
                • 5. Skip Down, Tuner Preset Down Button 13, 16, 18, 24
            • 6. Folder Button 21
              • 6. Folder Button 21
                • 6. Folder Button 21
            • 7. Stop Button 18
              • 7. Stop Button 18
                • 7. Stop Button 18
            • 8. Play Mode Button 16, 19
              • 8. Play Mode Button 16, 19
                • 8. Play Mode Button 16, 19
            • 9. Tuning Up and Down Buttons 23
              • 9. Tuning Up and Down Buttons 23
            • 10. Memory Button 20, 24
              • 10. Memory Button 20, 24
            • 11. Clock Button 13
              • 11. Clock Button 13
            • 12. Snooze/Dimmer Button 12, 25
              • 12. Snooze/Dimmer Button 12, 25
            • 13. Sleep Button 26
              • 13. Sleep Button 26
            • 14. Alarm Button 25
              • 14. Alarm Button 25
            • 15. Skip Up, Tuner Preset Up Button 13, 16, 18, 24
              • 15. Skip Up, Tuner Preset Up Button 13, 16, 18, 24
            • 16. Display Button 16
              • 16. Display Button 16
            • 17. Play/Pause Button 16, 18, 19
              • 17. Play/Pause Button 16, 18, 19
            • 18. E Sound/Demo Button 10, 12
              • 18. E Sound/Demo Button 10, 12
            • 19. Clear Button 20
              • 19. Clear Button 20
            • 20. EQ Button 12
              • 20. EQ Button 12
              • Before using remote control, please remove plastic shield at battery holder.
          Preparation for Use
          System connections
          • Make sure to unplug the AC power cord before any connections.
          n Antenna connection
          • Supplied FM antenna:
            • Supplied FM antenna:
            • Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direct...
          • Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the anten...
          • < Assembling >
            • < Assembling >
          • < Attaching to the wall >
            • < Attaching to the wall >
          • Wall
            • Wall
          • Screws (not supplied)
            • Screws (not supplied)
          n Outdoor FM antenna

          • Use an outdoor FM antenna if you require better reception. Consult your dealer.
          • • When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.
          n iPod connecting to TV

          • iPod photo and 5th Generation iPod with photo and video can be view by connecting to TV/monitor. ...
          n AC power connection

          • After checking all the connections have been made correctly, plug the AC power cord of this unit ...
          • • l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...
              • l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...
                • l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...
                  • l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...
          • n Demonstration mode
            • The first time the unit is plugged in, the unit will enter the low power consumption mode.
            • To activate the demonstration mode:
              • To activate the demonstration mode:
            • When the unit is in the power stand-by mode (low power consumption mode), press the E SOUND/DEMO ...
          • To return to the low power consumption mode:
            • To return to the low power consumption mode:
              • To return to the low power consumption mode:
            • When the unit is in the power stand-by mode, press the E SOUND/ DEMO button again. The iPod termi...
          • Note:
            • Note:
              • Note:
            • When the power is on, the E SOUND/DEMO button can be used to select the E SOUND mode.
          Preparation for Use
          Remote control

          • n Battery installation
          • 1
            • 1
              • 1
          • While pushing the locking tab toward the center of the remote control, slide out the battery holder.
            • While pushing the locking tab toward the center of the remote control, slide out the battery holder.
              • While pushing the locking tab toward the center of the remote control, slide out the battery holder.
          • 2
            • 2
              • 2
          • Remove the old battery from the battery holder, insert the new battery and then slide the battery...
            • Remove the old battery from the battery holder, insert the new battery and then slide the battery...
          l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...

          • l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...
            • l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...
              • l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...
          l Do not use rechargeable battery (nickel-cadmium battery, etc.).

          • l Do not use rechargeable battery (nickel-cadmium battery, etc.).
            • l Do not use rechargeable battery (nickel-cadmium battery, etc.).
              • l Do not use rechargeable battery (nickel-cadmium battery, etc.).
          l Installing the battery incorrectly may cause the unit to malfunction.

          • l Installing the battery incorrectly may cause the unit to malfunction.
            • l Installing the battery incorrectly may cause the unit to malfunction.
              • l Installing the battery incorrectly may cause the unit to malfunction.
          l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...

          • l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...
            • l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...
              • l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...
          l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...

          • l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...
            • l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...
              • l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...
          l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...

          • l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...
            • l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...
              • l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...
          l Keep the remote control away from moisture, heat, shock, and vibrations.

          • l Keep the remote control away from moisture, heat, shock, and vibrations.
            • l Keep the remote control away from moisture, heat, shock, and vibrations.
              • l Keep the remote control away from moisture, heat, shock, and vibrations.
          n Test of the remote control

          • Check the remote control after checking all the connections (see page 10).
          • Point the remote control directly at the remote sensor on the unit.
            • Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy music.
          Basic Operation
          General control

          • n To turn the power on
            • Press the ON/STAND-BY button to turn the power on.
          • After use:
            • After use:
              • After use:
          • Press the ON/STAND-BY button to enter the power stand-by mode.
            • Press the ON/STAND-BY button to enter the power stand-by mode.
          n Illumination light control

          • Press the SNOOZE/DIMMER button to adjust the brightness of the display and LED.
          • n Volume auto fade-in
            • n Volume auto fade-in
              • If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16...
          n Volume control

          • Main unit and remote control operation: Press the VOL (+ or –) button to increase or decrease the...
          n E SOUND control

          • When the E SOUND/DEMO button is pressed, the unit will enter the E Sound mode and adjust low bass...
          n Equalizer

          • When the EQ button is pressed, the current mode setting will be displayed. To change to a differe...
          n Function

          • When the FUNCTION button on remote control is pressed, the current function will change to differ...
          • Note:
          • The backup function protect the memorized function mode for a few days should there be a power fa...
          Basic Operation
          Setting the clock

          • In this example, the clock is set for the 12-hour (12:00 AM) display.
          • 1 Press the CLOCK button for more than 2 seconds.
            • 1 Press the CLOCK button for more than 2 seconds.
              • 1 Press the CLOCK button for more than 2 seconds.
                • 1 Press the CLOCK button for more than 2 seconds.
          • 2 Press the or button to select 12-hour or 24-hour display and then press the CLOCK button.
            • 2 Press the
              • 2 Press the
                • 2 Press the
          • “AM 12:00”
            • “AM 12:00”
          • The 12-hour display will appear.
            • The 12-hour display will appear.
          • (AM 12:00 - PM 11:59)
            • (AM 12:00 - PM 11:59)
          • “AM 0:00”
            • “AM 0:00”
          • The 12-hour display will appear.
            • The 12-hour display will appear.
          • (AM 0:00 - PM 11:59)
            • (AM 0:00 - PM 11:59)
          • “0:00”
            • “0:00”
          • The 24-hour display will appear.
            • The 24-hour display will appear.
          • (0:00 - 23:59)
            • (0:00 - 23:59)
          • 3 Press the or button to adjust the hour and then press the CLOCK button.
            • 3 Press the
              • 3 Press the
                • 3 Press the
          • Press the or button once to advance the time by 1hour. Hold it down to advance continuously.
            • Press the
          • 4 Press the or button to adjust the minutes and then press the CLOCK button.
            • 4 Press the
              • 4 Press the
                • 4 Press the
          • Press the or button once to advance the time by 1minute. Hold it down to change the time in 5-mi...
            • Press the
          [When the unit is in the stand-by mode]
          Press the CLOCK button to enter the clock function.
          [When the power is on]
          Press DISPLAY button on remote control to toggle between the function information and clock display.
          l The clock will continue counting for 8 hours should there be a power failure or the AC power co...
          l The “CLOCK ADJ” will appear or time will flash to confirm the time display when the AC power su...
          Perform “Setting the clock” from step 1. Step 2 (selecting the 12- hour or 24-hour display) will ...
          • 1
            • 1
          • Clear all the programmed contents. [Refer to “Clearing all the memory (reset)” on page 29 for det...
            • Clear all the programmed contents. [Refer to “Clearing all the memory (reset)” on page 29 for det...
          • 2
            • 2
          • Perform “Setting the clock” from step 1.
            • Perform “Setting the clock” from step 1.
          • 1
            • 1
          • Slide the ST switch to +1 to advance the time 1 hour. indicator will appear.
            • Slide the ST switch to +1 to advance the time 1 hour.
          • 2
            • 2
          • Slide the ST switch to -1 to turn the clock back 1 hour.
            • Slide the ST switch to -1 to turn the clock back 1 hour.
          iPod
          Listening to the iPod

          • Supported iPod:
            • l iPod nano (software 1.0 above)
              • l iPod nano (software 1.0 above)
                • l iPod nano (software 1.0 above)
                  • l iPod nano (software 1.0 above)
            • l iPod photo (software 1.0 above)
              • l iPod photo (software 1.0 above)
                • l iPod photo (software 1.0 above)
                  • l iPod photo (software 1.0 above)
            • l iPod mini (software 1.2 above)
              • l iPod mini (software 1.2 above)
                • l iPod mini (software 1.2 above)
                  • l iPod mini (software 1.2 above)
            • l 5th Generation iPod (software 1.0 above) (Dock connector equipped Click Wheel model)
              • l 5th Generation iPod (software 1.0 above) (Dock connector equipped Click Wheel model)
                • l 5th Generation iPod (software 1.0 above) (Dock connector equipped Click Wheel model)
                  • l 5th Generation iPod (software 1.0 above) (Dock connector equipped Click Wheel model)
            • l 4th Generation iPod (software 3.0.2 above) (Dock connector equipped Click Wheel model)
              • l 4th Generation iPod (software 3.0.2 above) (Dock connector equipped Click Wheel model)
                • l 4th Generation iPod (software 3.0.2 above) (Dock connector equipped Click Wheel model)
                  • l 4th Generation iPod (software 3.0.2 above) (Dock connector equipped Click Wheel model)
            • l 3rd Generation iPod (software 2.2 above) (Dock connector equipped Click Wheel model)
              • l 3rd Generation iPod (software 2.2 above) (Dock connector equipped Click Wheel model)
                • l 3rd Generation iPod (software 2.2 above) (Dock connector equipped Click Wheel model)
                  • l 3rd Generation iPod (software 2.2 above) (Dock connector equipped Click Wheel model)
              • l Once the iPod is connected to the unit it will begin charging.
                • l Once the iPod is connected to the unit it will begin charging.
                  • l Once the iPod is connected to the unit it will begin charging.
                    • l Once the iPod is connected to the unit it will begin charging.
              • l The iPod unit cannot be charged while the main unit is in the stand-by mode.
                • l The iPod unit cannot be charged while the main unit is in the stand-by mode.
                  • l The iPod unit cannot be charged while the main unit is in the stand-by mode.
                    • l The iPod unit cannot be charged while the main unit is in the stand-by mode.
              • When you press any of the following buttons, the unit turns on.
              • l iPod button (main unit): The unit turns on and the “iPod” function is activated.
                • l iPod button (main unit): The unit turns on and the “iPod” function is activated.
                  • l iPod button (main unit): The unit turns on and the “iPod” function is activated.
                    • l iPod button (main unit): The unit turns on and the “iPod” function is activated.
          • n iPod adaptor connection
            • Choose the iPod adaptor that fits your iPod. Your iPod will fit snuggly into the correct adaptor....
              • Choose the iPod adaptor that fits your iPod. Your iPod will fit snuggly into the correct adaptor....
                • Choose the iPod adaptor that fits your iPod. Your iPod will fit snuggly into the correct adaptor....
                  • Choose the iPod adaptor that fits your iPod. Your iPod will fit snuggly into the correct adaptor....
          • iPod Adapter No.
            • iPod Adapter No.
          • iPod Description
            • iPod Description
          • Capacity
            • Capacity
          • 3
            • 3
          • iPod mini
            • iPod mini
          • 4GB & 6GB
            • 4GB & 6GB
          • 4
            • 4
          • 4G iPod & U2 iPod
            • 4G iPod & U2 iPod
          • 20GB
            • 20GB
          • 5
          • 4G iPod
          • 40GB
            • 40GB
          • 6
            • 6
          • iPod photo & Color U2 iPod
          • 20GB & 30GB
          • 7
            • 7
          • iPod photo
          • 40GB & 60GB
            • 40GB & 60GB
          • 6
          • iPod with color display
          • 20GB
            • 20GB
          • 7
            • 7
          • iPod with color display
          • 60GB
          • 8
            • 8
          • iPod nano
          • 2GB & 4GB
            • 2GB & 4GB
          • 9
            • 9
          • iPod (10/12/05 w/video)
          • 30GB
          • 10
            • 10
          • iPod (10/12/05 w/video)
          • 60GB
            • 60GB
          iPod

          • Push the iPod sliding door
          • n To remove iPod adaptor
          • n iPod playback
          • 1 Press the ON/STAND-BY button to turn the power on. The iPod terminal door will automatically op...
            • 1 Press the ON/STAND-BY button to turn the power on.
              • 1 Press the ON/STAND-BY button to turn the power on.
                • 1 Press the ON/STAND-BY button to turn the power on.
          • 2 Press the iPod button.
            • 2 Press the iPod button.
              • 2 Press the iPod button.
                • 2 Press the iPod button.
          • 3 Insert iPod unit in iPod slot of main unit.
            • 3 Insert iPod unit in iPod slot of main unit.
              • 3 Insert iPod unit in iPod slot of main unit.
                • 3 Insert iPod unit in iPod slot of main unit.
          • 4 Press the / button to start playback.
            • 4 Press the
              • 4 Press the
                • 4 Press the
          iPod
          Listening to the iPod (continued)

          • n Various iPod functions
          • Function
            • Function
              • Function
          • Main unit
            • Main unit
              • Main unit
          • Remote control
            • Remote control
              • Remote control
          • Operation
            • Operation
              • Operation
          • Play
            • Play
              • Play
          • Press in the pause mode.
            • Press in the pause mode.
          • Pause
            • Pause
              • Pause
          • Press in the playback mode.
            • Press in the playback mode.
          • Track up/ down
            • Track up/ down
          • Press in the playback or pause mode. If you press the button in the pause mode, press the / butto...
            • Press in the playback or pause mode. If you press the button in the pause mode, press the
          • Fast forward/ reverse
            • Fast forward/ reverse
              • Fast forward/ reverse
                • Fast forward/ reverse
          • Press and hold down in the playback mode.
            • Press and hold down in the playback mode.
          • Release the button to resume playback.
            • Release the button to resume playback.
          • Display
            • Display
          • ____
          • Press in the playback mode to toggle iPod unit display.
            • Press in the playback mode to toggle iPod unit display.
          • Repeat
            • Repeat
          • ____
          • Press to toggle repeat mode.
            • Press to toggle repeat mode.
          • Random
            • Random
          • ____
          • Press and hold down to toggle random mode.
            • Press and hold down to toggle random mode.
          Below operation can be done depend on iPod generation.
          When main unit turn to power on (including alarm function), iPod unit will automatically turn to ...
          When iPod unit start playback (including iPod alarm function), below operation will occur:
          l During other function is selected, automatically change to iPod function.

          • l During other function is selected, automatically change to iPod function.
            • l During other function is selected, automatically change to iPod function.
              • l During other function is selected, automatically change to iPod function.
          Caution:

          • l During playback (including iPod alarm function) operation on iPod unit, sound from main unit wi...
            • l During playback (including iPod alarm function) operation on iPod unit, sound from main unit wi...
              • l During playback (including iPod alarm function) operation on iPod unit, sound from main unit wi...
                • l During playback (including iPod alarm function) operation on iPod unit, sound from main unit wi...
          • l Unplug all iPod accessory before you insert to iPod slot. iPod playback may become malfunction.
            • l Unplug all iPod accessory before you insert to iPod slot. iPod playback may become malfunction.
              • l Unplug all iPod accessory before you insert to iPod slot. iPod playback may become malfunction.
                • l Unplug all iPod accessory before you insert to iPod slot. iPod playback may become malfunction.
          • When iPod unit is inserted, iPod unit will automatically go to power off if there is no operation...
            • When iPod unit is inserted, iPod unit will automatically go to power off if there is no operation...
              • When iPod unit is inserted, iPod unit will automatically go to power off if there is no operation...
                • When iPod unit is inserted, iPod unit will automatically go to power off if there is no operation...
          CD or MP3/WMA disc Playback
          Listening to a CD or MP3/WMA disc

          • This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA fil...
          • MP3: MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3.
            • MP3: MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3.
          • MP3 is a type of audio code which is processed by significant compression from the original audio...
            • MP3 is a type of audio code which is processed by significant compression from the original audio...
            • l This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files.
              • l This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files.
                • l This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files.
                  • l This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files.
            • l During VBR file playback, time counter in the display may differ from its actual playback time.
              • l During VBR file playback, time counter in the display may differ from its actual playback time.
                • l During VBR file playback, time counter in the display may differ from its actual playback time.
                  • l During VBR file playback, time counter in the display may differ from its actual playback time.
          • WMA: WMA files are Advanced System Format files that include audio files which are compressed wit...
            • WMA: WMA files are Advanced System Format files that include audio files which are compressed wit...
            • l “MP3” and “WMA” indicator will light up after the unit reads information on an MP3 or WMA disc.
              • l “MP3” and “WMA” indicator will light up after the unit reads information on an MP3 or WMA disc.
                • l “MP3” and “WMA” indicator will light up after the unit reads information on an MP3 or WMA disc.
                  • l “MP3” and “WMA” indicator will light up after the unit reads information on an MP3 or WMA disc.
            • When you press any of the following buttons, the unit turns on.
            • l CD button (main unit): The unit turns on and the “CD” function is activated.
              • l CD button (main unit): The unit turns on and the “CD” function is activated.
                • l CD button (main unit): The unit turns on and the “CD” function is activated.
                  • l CD button (main unit): The unit turns on and the “CD” function is activated.
          CD or MP3/WMA disc Playback
          Listening to a CD or MP3/WMA disc (continued)
          • 1 Press the ON/STAND-BY button to turn the power on.
            • 1 Press the ON/STAND-BY button to turn the power on.
              • 1 Press the ON/STAND-BY button to turn the power on.
                • 1 Press the ON/STAND-BY button to turn the power on.
          • 2 Press the CD button.
            • 2 Press the CD button.
              • 2 Press the CD button.
                • 2 Press the CD button.
          • 3 Insert the disc into the disc, label side up.
            • 3 Insert the disc into the disc, label side up.
              • 3 Insert the disc into the disc, label side up.
                • 3 Insert the disc into the disc, label side up.
          • 4 Press the OPEN/CLOSE button to close the disc tray 1.
            • 4 Press the
              • 4 Press the
                • 4 Press the
          • l Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a no...
            • l Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a no...
          • 5 Press the / button to start playback.
            • 5 Press the
              • 5 Press the
                • 5 Press the
          l Playback will begin from track 1.

          • l Playback will begin from track 1.
            • l Playback will begin from track 1.
              • l Playback will begin from track 1.
          l After the last track on the disc is played, the unit will stop automatically.

          • l After the last track on the disc is played, the unit will stop automatically.
            • l After the last track on the disc is played, the unit will stop automatically.
              • l After the last track on the disc is played, the unit will stop automatically.
          • In the stop mode, press the EJECT button.
          • l Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions.
            • l Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions.
              • l Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions.
                • l Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions.
          • l Do not push the disc while it is moving.
            • l Do not push the disc while it is moving.
              • l Do not push the disc while it is moving.
                • l Do not push the disc while it is moving.
          • l If the power fails while the disc is moving, wait until the power is restored.
            • l If the power fails while the disc is moving, wait until the power is restored.
              • l If the power fails while the disc is moving, wait until the power is restored.
                • l If the power fails while the disc is moving, wait until the power is restored.
          • l If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.
            • l If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.
              • l If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.
                • l If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.
          n Various disc functions
          • Function
            • Function
              • Function
          • Main unit
            • Main unit
              • Main unit
          • Remote control
            • Remote control
              • Remote control
          • Operation
            • Operation
              • Operation
          • Play
            • Play
              • Play
          • Press in the stop mode.
            • Press in the stop mode.
          • Stop
            • Stop
              • Stop
          • Press in the playback mode.
            • Press in the playback mode.
          • Pause
            • Pause
              • Pause
          • Press in the playback mode. Press the / button to resume playback from the paused point.
            • Press in the playback mode. Press the
          • Track up/ Track down
            • Track up/ Track down
              • Track up/ Track down
          • Press in the playback or stop mode.
            • Press in the playback or stop mode.
          • If you press the button in the stop mode, press the / button to start the desired track.
            • If you press the button in the stop mode, press the
          • Fast forward/Fast reverse
            • Fast forward/Fast reverse
              • Fast forward/Fast reverse
          • Press and hold down in the playback mode.
            • Press and hold down in the playback mode.
          • Release the button to resume playback.
            • Release the button to resume playback.
          • l When the end of the last track is reached during fast forward, “END” will appear on the display...
            • l When the end of the last track is reached during fast forward, “END” will appear on the display...
          • l Rewritable multi session discs which writing is not finished, can still be played.
            • l Rewritable multi session discs which writing is not finished, can still be played.
          CD or MP3/WMA disc Playback
          Advanced CD or MP3/WMA disc playback

          • n Repeat play
            • Repeat play can play all tracks on a disc or a programmed sequence continuously.
          • To repeat play:
            • To repeat play:
              • To repeat play:
          • Press the PLAY MODE button on the remote control.
            • Press the PLAY MODE button on the remote control.
          • Press the / / button.
            • Press the
          Press the PLAY MODE button again. “
          n Random play

          • The tracks on the disc can be played in random order automatically.
          • To random play:
            • To random play:
              • To random play:
          • Press and hold down the PLAY MODE button on the remote control. Press / button.
            • Press and hold down the PLAY MODE button on the remote control. Press
          Press and hold down the PLAY MODE button.
          “RND” will disappear.
          l If you press the

          • l If you press the
            • l If you press the
              • l If you press the
          l In random play, the CD player will select and play tracks automatically. (You cannot select the...

          • l In random play, the CD player will select and play tracks automatically. (You cannot select the...
            • l In random play, the CD player will select and play tracks automatically. (You cannot select the...
              • l In random play, the CD player will select and play tracks automatically. (You cannot select the...
          After performing repeat play, be sure to press the
          CD or MP3/WMA disc Playback
          Advanced CD or MP3/WMA disc playback (continued)

          • n Programmed play
            • You can choose up to 32 selections for playback in the order you like.
          • 1 While in the stop mode, press the MEMORY button to enter the programming save mode.
            • 1 While in the stop mode, press the MEMORY button to enter the programming save mode.
              • 1 While in the stop mode, press the MEMORY button to enter the programming save mode.
                • 1 While in the stop mode, press the MEMORY button to enter the programming save mode.
          • 2 Press the or button to select the desired track.
            • 2 Press the
              • 2 Press the
                • 2 Press the
          • Selected track number
            • Selected track number
          • 3 Press the MEMORY button to save the track number.
            • 3 Press the MEMORY button to save the track number.
              • 3 Press the MEMORY button to save the track number.
                • 3 Press the MEMORY button to save the track number.
          • 4 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.
            • 4 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.
              • 4 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.
                • 4 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.
          • If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.
            • If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.
          • 5 Press the button.
            • 5 Press the
              • 5 Press the
                • 5 Press the
          • The total number in memory will appear.
            • The total number in memory will appear.
          • 6 Press the / button to start playback.
            • 6 Press the
              • 6 Press the
                • 6 Press the
          • To clear the programmed selections:
            • To clear the programmed selections:
              • To clear the programmed selections:
          • Press the CLEAR button on the remote control while the “MEM” indicator is flashing.
            • Press the CLEAR button on the remote control while the “MEM” indicator is flashing.
          • Each time the button is pressed, one track will be cleared, beginning with the last track program...
            • Each time the button is pressed, one track will be cleared, beginning with the last track program...
          While in the stop mode and the “MEM” indicator is lit, press the CLEAR button on the remote contr...
          If a program has been previously stored, the “MEM” indicator will be displayed. Then follow steps...
          While the unit is stopped in the programmed play mode, press the
          l When a disc with programmed tracks is ejected, the program is automatically canceled.

          • l When a disc with programmed tracks is ejected, the program is automatically canceled.
            • l When a disc with programmed tracks is ejected, the program is automatically canceled.
              • l When a disc with programmed tracks is ejected, the program is automatically canceled.
          l Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from...

          • l Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from...
            • l Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from...
              • l Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from...
          l During the program operation, random play is not possible.

          • l During the program operation, random play is not possible.
            • l During the program operation, random play is not possible.
              • l During the program operation, random play is not possible.
          CD or MP3/WMA disc Playback
          MP3/WMA folder mode (only for MP3/WMA files)

          • There are many music sites on the internet that you can download MP3/WMA (Windows Media Audio) mu...
          • You can then playback these downloaded music files by burning them to a CD-R/RW disc.
          • If MP3/WMA files are recorded in several folders, a folder number will be set to each folder auto...
          • These folders can be selected by the FOLDER button on the remote control. If there is no supporte...
          • Example: How to set folder number if MP3/WMA format files are recorded as below figure.
          • 1.
            • 1.
          • ROOT folder is set as folder 1.
            • ROOT folder is set as folder 1.
          • 2.
            • 2.
          • As for folders inside ROOT folder (Folder A and Folder B), the folder which is recorded earlier o...
            • As for folders inside ROOT folder (Folder A and Folder B), the folder which is recorded earlier o...
          • 3.
            • 3.
          • As for folder inside Folder A (Folder C and Folder D), the folder which is recorded earlier on th...
            • As for folder inside Folder A (Folder C and Folder D), the folder which is recorded earlier on th...
          • 4.
            • 4.
          • Because there is no folder in Folder C, Folder D will be set as folder 4.
            • Because there is no folder in Folder C, Folder D will be set as folder 4.
          • 5.
            • 5.
          • Folder E that is inside Folder D will be set as folder 5.
            • Folder E that is inside Folder D will be set as folder 5.
          • 6.
            • 6.
          • Folder B inside ROOT folder will be set as folder 6.
            • Folder B inside ROOT folder will be set as folder 6.
          * The folder and file order information which is recorded on the disc depends on the writing soft...
          Folder mode on/off can be operated by the FOLDER button on the remote control. Files that are pla...
          Folder Mode On case: All the files inside the selected folder will be played back. In case Folder...
          CD or MP3/WMA disc Playback
          MP3/WMA folder mode (only for MP3/WMA files) (continued)

          • n Procedure to playback MP3/WMA disc
            • To playback CD-R/RW.
          • 1 Press the CD button, and load a MP3/WMA disc.
            • 1 Press the CD button, and load a MP3/WMA disc.
              • 1 Press the CD button, and load a MP3/WMA disc.
                • 1 Press the CD button, and load a MP3/WMA disc.
              • l After disc is loaded, disc info will be displayed.
              • l In case folder is selected, proceed to step 2.
              • l In case file is selected, proceed to step 4.
          • 2 Press the FOLDER button, and press the TUNING ( or ) button to select desired playback folder. ...
            • 2 Press the FOLDER button, and press the TUNING (
              • 2 Press the FOLDER button, and press the TUNING (
                • 2 Press the FOLDER button, and press the TUNING (
              • l To start playback with folder mode on, go to step 5.
              • l To change the playback folder, press the TUNING (
          • 3 Select desired file to be played back by pressing the or button. Proceed to step 5.
            • 3 Select desired file to be played back by pressing the
              • 3 Select desired file to be played back by pressing the
                • 3 Select desired file to be played back by pressing the
          • 4 Select desired file to be played back by pressing the or button. (Folder mode off)
            • 4 Select desired file to be played back by pressing the
              • 4 Select desired file to be played back by pressing the
                • 4 Select desired file to be played back by pressing the
          • 5 Press the / button. Playback will start and file name will be displayed.
            • 5 Press the
              • 5 Press the
                • 5 Press the
          • l Title, Artist & Album name is displayed if it is recorded on the disc.
            • l Title, Artist & Album name is displayed if it is recorded on the disc.
              • l Title, Artist & Album name is displayed if it is recorded on the disc.
              • l Display content can be changed by pressing the DISPLAY button.
              • In case of playback with the folder mode on, press the TUNING (
          Radio
          Listening to the radio

          • • When you press any of the following buttons, the unit turns on.
            • l TUNER button (main unit): The unit turns on and the TUNER function is activated.
              • l TUNER button (main unit): The unit turns on and the TUNER function is activated.
                • l TUNER button (main unit): The unit turns on and the TUNER function is activated.
                  • l TUNER button (main unit): The unit turns on and the TUNER function is activated.
          • n Tuning
          • 1 Press the ON/STAND-BY button to turn the power on.
            • 1 Press the ON/STAND-BY button to turn the power on.
              • 1 Press the ON/STAND-BY button to turn the power on.
                • 1 Press the ON/STAND-BY button to turn the power on.
          • 2 Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select t...
            • 2 Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select t...
              • 2 Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select t...
                • 2 Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select t...
          • 3 Press the TUNING ( or ) button on the remote control to tune in to the desired station.
            • 3 Press the TUNING (
              • 3 Press the TUNING (
                • 3 Press the TUNING (
          • Manual tuning:
            • Manual tuning:
              • Manual tuning:
          • Press the TUNING ( or ) button as many times as required to tune in to the desired station.
            • Press the TUNING (
          • Auto tuning:
            • Auto tuning:
              • Auto tuning:
          • When the TUNING ( or ) button is pressed for more than 0.5 seconds, scanning will start automatic...
            • When the TUNING (
          l When radio interference occurs, auto scan tuning may stop automatically at that point.

          • l When radio interference occurs, auto scan tuning may stop automatically at that point.
            • l When radio interference occurs, auto scan tuning may stop automatically at that point.
              • l When radio interference occurs, auto scan tuning may stop automatically at that point.
          l Auto scan tuning will skip weak signal stations.

          • l Auto scan tuning will skip weak signal stations.
            • l Auto scan tuning will skip weak signal stations.
              • l Auto scan tuning will skip weak signal stations.
          l To stop the auto tuning, press the TUNING (

          • l To stop the auto tuning, press the TUNING (
            • l To stop the auto tuning, press the TUNING (
              • l To stop the auto tuning, press the TUNING (
          Press the TUNER button to display the “ST” indicator.
          l “

          • l “
            • l “
              • l “
          l If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The recep...

          • l If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The recep...
            • l If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The recep...
              • l If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The recep...
          • FM stereo mode indicator
            • FM stereo mode indicator
          • FM stereo receiving indicator
            • FM stereo receiving indicator
          Radio
          Listening to the radio (continued)

          • n Memorizing a station
            • You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tu...
          • 1 Perform steps 1 - 3 in “Tuning” on page 23.
            • 1 Perform steps 1 - 3 in “Tuning” on page 23.
              • 1 Perform steps 1 - 3 in “Tuning” on page 23.
                • 1 Perform steps 1 - 3 in “Tuning” on page 23.
          • 2 Press the MEMORY button to enter the preset tuning saving mode.
            • 2 Press the MEMORY button to enter the preset tuning saving mode.
              • 2 Press the MEMORY button to enter the preset tuning saving mode.
                • 2 Press the MEMORY button to enter the preset tuning saving mode.
          • 3 Within 30 seconds, press the or button to select the preset channel number.
            • 3 Within 30 seconds, press the
              • 3 Within 30 seconds, press the
                • 3 Within 30 seconds, press the
          • Store the stations in memory, in order, starting with preset channel 1.
            • Store the stations in memory, in order, starting with preset channel 1.
          • 4 Within 30 seconds, press the MEMORY button to store that station in memory.
            • 4 Within 30 seconds, press the MEMORY button to store that station in memory.
              • 4 Within 30 seconds, press the MEMORY button to store that station in memory.
                • 4 Within 30 seconds, press the MEMORY button to store that station in memory.
          • If the “MEMORY” and preset number indicators disappear before the station is memorized, repeat th...
            • If the “MEMORY” and preset number indicators disappear before the station is memorized, repeat th...
          • 5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
            • 5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
              • 5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
                • 5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
          • When a new station is stored in memory, the station previously memorized for that preset channel ...
            • When a new station is stored in memory, the station previously memorized for that preset channel ...
          The backup function protects the memorized stations for a few hours should there be a power failu...
          n To recall a memorized station
          • Press the or button for less than 0.5 seconds to select the desired station.
            • Press the
          n To scan the preset stations

          • The stations saved in memory can be scanned automatically. (Preset memory scan)
          • 1
            • 1
          • Press the or button for more than 0.5 seconds.
            • Press the
          • The preset number will flash and the programmed stations will be tuned in sequentially, for 5 sec...
            • The preset number will flash and the programmed stations will be tuned in sequentially, for 5 sec...
          • 2
            • 2
          • Press the or button again when the desired station is located.
            • Press the
          n To erase entire preset memory
          • 1
            • 1
          • Press and hold the CLEAR button for more than 3 seconds. “TUN CLEAR” will be displayed.
            • Press and hold the CLEAR button for more than 3 seconds. “TUN CLEAR” will be displayed.
          • 2
            • 2
          • Within 10 seconds, press the MEMORY button.
            • Within 10 seconds, press the MEMORY button.
            • “COMPLETE” will be displayed.
          Advanced Features
          Alarm and sleep operation

          • n Alarm
            • The unit turns on and play desired source (iPod, CD, TUNER, AUX) or Buzzer sound for 30 minutes.
              • The unit turns on and play desired source (iPod, CD, TUNER, AUX) or Buzzer sound for 30 minutes.
          • 1
            • 1
          • Check that the clock is set to the correct time (refer page 13).
            • Check that the clock is set to the correct time (refer page 13).
          • If it is not set, you cannot use the alarm function.
            • If it is not set, you cannot use the alarm function.
          • 2
            • 2
          • For iPOD playback: Insert iPod to the unit.
          • 3
            • 3
          • For TUNER: Set preset memory.
          • 4
            • 4
          • For CD playback: Insert disc to the unit.
          • 1 Press and hold the ALARM button for more than 2 seconds.
            • 1 Press and hold the ALARM button for more than 2 seconds.
              • 1 Press and hold the ALARM button for more than 2 seconds.
                • 1 Press and hold the ALARM button for more than 2 seconds.
          • 2 Press the or button to select source or buzzer.
            • 2 Press the
              • 2 Press the
                • 2 Press the
          • l If TUNER is selected, press the or button to select a preset station.
            • l If TUNER is selected, press the
              • l If TUNER is selected, press the
                • l If TUNER is selected, press the
                  • l If TUNER is selected, press the
                    • l If TUNER is selected, press the
          • Press the ALARM button.
            • Press the ALARM button.
          • 3 Press the or button to adjust the hour. Press the ALARM button.
            • 3 Press the
              • 3 Press the
                • 3 Press the
          • 4 Press the or button to adjust the minute. Press the ALARM button.
            • 4 Press the
              • 4 Press the
                • 4 Press the
          • 5 If other than BUZZER is selected in step 2, press the or button to select volume. Press the ALA...
            • 5 If other than BUZZER is selected in step 2, press the
              • 5 If other than BUZZER is selected in step 2, press the
                • 5 If other than BUZZER is selected in step 2, press the
          • l After source is selected in step 2, press and hold the ALARM button.
            • l After source is selected in step 2, press and hold the ALARM button.
          • l If TUNER is selected, press and hold the ALARM button after preset station is selected in step 3.
            • l If TUNER is selected, press and hold the ALARM button after preset station is selected in step 3.
          • l The time and volume will be automatically set to the previous setting.
            • l The time and volume will be automatically set to the previous setting.
          • 1
            • 1
          • Press the ALARM ON/OFF button on main unit to activate and deactivate the alarm function. When ac...
            • Press the ALARM ON/OFF button on main unit to activate and deactivate the alarm function. When ac...
          • 2
            • 2
          • Set to CLOCK function or stand-by mode.
            • Set to CLOCK function or stand-by mode.
          l Press the ALARM button.

          • l Press the ALARM button.
            • l Press the ALARM button.
              • l Press the ALARM button.
          l The selected source or buzzer type will blink.

          • l The selected source or buzzer type will blink.
            • l The selected source or buzzer type will blink.
              • l The selected source or buzzer type will blink.
          l The unit will display the alarm time for 3 seconds.

          • l The unit will display the alarm time for 3 seconds.
            • l The unit will display the alarm time for 3 seconds.
              • l The unit will display the alarm time for 3 seconds.
          l During stand-by mode, the display will remain for 6 seconds.

          • l During stand-by mode, the display will remain for 6 seconds.
            • l During stand-by mode, the display will remain for 6 seconds.
              • l During stand-by mode, the display will remain for 6 seconds.
          Example: The time is 10:00 AM and iPod function is selected.
          Notes:
          l Buzzer sound will be output from right speaker only.

          • l Buzzer sound will be output from right speaker only.
            • l Buzzer sound will be output from right speaker only.
              • l Buzzer sound will be output from right speaker only.
          l Alarm will not activate during power on mode.

          • l Alarm will not activate during power on mode.
            • l Alarm will not activate during power on mode.
              • l Alarm will not activate during power on mode.
          l When iPod is selected in step 2, if iPod unit is not detected during alarm activation, source w...

          • l When iPod is selected in step 2, if iPod unit is not detected during alarm activation, source w...
            • l When iPod is selected in step 2, if iPod unit is not detected during alarm activation, source w...
              • l When iPod is selected in step 2, if iPod unit is not detected during alarm activation, source w...
          l When performing alarm using another unit connected to AUX, select AUX in step 2. The unit will ...

          • l When performing alarm using another unit connected to AUX, select AUX in step 2. The unit will ...
            • l When performing alarm using another unit connected to AUX, select AUX in step 2. The unit will ...
              • l When performing alarm using another unit connected to AUX, select AUX in step 2. The unit will ...
          n Snooze function

          • Once timer playback has started, pressing the SNOOZE/DIMMER button will stop playback for 5 minut...
          n To turn off the alarm function

          • During alarm or snooze, press the ALARM ON/OFF button to turn off.
          Advanced Features
          Alarm and sleep operation (continued)

          • n Sleep operation
            • The radio and iPod can be turned off automatically.
          • 1 Play back the desired sound source.
            • 1 Play back the desired sound source.
              • 1 Play back the desired sound source.
                • 1 Play back the desired sound source.
          • 2 Press the SLEEP button to select sleep time.
            • 2 Press the SLEEP button to select sleep time.
              • 2 Press the SLEEP button to select sleep time.
                • 2 Press the SLEEP button to select sleep time.
          • 3 Press the MEMORY button.
            • 3 Press the MEMORY button.
              • 3 Press the MEMORY button.
                • 3 Press the MEMORY button.
          • “SLEEP” will appear.
            • “SLEEP” will appear.
          • 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed.
            • 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed.
              • 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed.
                • 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed.
          • The volume will be turned down 1 minute before the sleep operation finishes.
            • The volume will be turned down 1 minute before the sleep operation finishes.
          • 1
            • 1
          • While “SLEEP” is indicated, press the SLEEP button once to select “SLEEP XXX”.
            • While “SLEEP” is indicated, press the SLEEP button once to select “SLEEP XXX”.
          • “XXX” is sleep remaining time.
            • “XXX” is sleep remaining time.
          • l The remaining sleep time is displayed for about 10 seconds.
            • l The remaining sleep time is displayed for about 10 seconds.
          • l You can change the remaining sleep time while it is displayed by pressing the SLEEP button (ste...
            • l You can change the remaining sleep time while it is displayed by pressing the SLEEP button (ste...
          Press the ON/STAND-BY button while “SLEEP” is indicated.
          To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.
          • 1
            • 1
          • While “SLEEP” is indicated, press the SLEEP button to select “SLEEP OFF”, and press the MEMORY bu...
            • While “SLEEP” is indicated, press the SLEEP button to select “SLEEP OFF”, and press the MEMORY bu...
          n To use alarm and sleep operation together

          • For example, you can fall asleep listening to the radio and wake up to iPod in the next morning.
          • 1
            • 1
          • Set the sleep time (see left, steps 1 - 4).
            • Set the sleep time (see left, steps 1 - 4).
          • 2
            • 2
          • While the sleep timer is set, set the alarm
            • While the sleep timer is set, set the alarm
            • (steps 1 - 5, page 25).
          Advanced Features
          Enhancing your system

          • The connection cord is not included. Purchase a commercially available cord as shown below.
          • • When you press any of the following buttons, the unit turns on.
            • l AUX button (main unit): The unit turns on and the AUX function is activated.
              • l AUX button (main unit): The unit turns on and the AUX function is activated.
                • l AUX button (main unit): The unit turns on and the AUX function is activated.
                  • l AUX button (main unit): The unit turns on and the AUX function is activated.
          • n Listening to the playback sounds from VCR, DVD, etc.
          • 1 Use a connection cord to connect the VCR, DVD etc. to the AUX IN jacks.
            • 1 Use a connection cord to connect the VCR, DVD etc. to the AUX IN jacks.
              • 1 Use a connection cord to connect the VCR, DVD etc. to the AUX IN jacks.
          • When using video equipment, connect the audio output to this unit and the video output to a telev...
          • 2 Press the ON/STAND-BY button to turn the power on.
            • 2 Press the ON/STAND-BY button to turn the power on.
              • 2 Press the ON/STAND-BY button to turn the power on.
                • 2 Press the ON/STAND-BY button to turn the power on.
          • 3 Press the AUX button on the main unit once or press the FUNCTION button on remote control repea...
            • 3 Press the AUX button on the main unit once or press the FUNCTION button on remote control repea...
              • 3 Press the AUX button on the main unit once or press the FUNCTION button on remote control repea...
                • 3 Press the AUX button on the main unit once or press the FUNCTION button on remote control repea...
          • 4 Play the connected equipment.
            • 4 Play the connected equipment.
              • 4 Play the connected equipment.
                • 4 Play the connected equipment.
          To prevent noise interference, place the unit away from the television.
          n Headphones

          • l Before plugging in or unplugging the headphones, reduce the volume.
            • l Before plugging in or unplugging the headphones, reduce the volume.
              • l Before plugging in or unplugging the headphones, reduce the volume.
                • l Before plugging in or unplugging the headphones, reduce the volume.
          • l Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms...
            • l Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms...
              • l Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms...
                • l Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms...
          • l Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the ...
            • l Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the ...
              • l Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the ...
                • l Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the ...
          • l During alarm activation, sound will be output to the speaker even if headphones is plugged in.
            • l During alarm activation, sound will be output to the speaker even if headphones is plugged in.
              • l During alarm activation, sound will be output to the speaker even if headphones is plugged in.
                • l During alarm activation, sound will be output to the speaker even if headphones is plugged in.
          References
          Troubleshooting chart

          • Many potential problems can be resolved by the owner without calling a service technician.
          • If something is wrong with this product, check the following before calling your authorized SHARP...
          • n General
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l The clock is not set to the correct time.
            • l The clock is not set to the correct time.
          • l Is the ST switch set to the correct setting?
            • l Is the ST switch set to the correct setting?
              • l Is the ST switch set to the correct setting?
              • l Did a power failure occur? Reset the clock.
          • l When a button is pressed, the unit does not respond.
            • l When a button is pressed, the unit does not respond.
          • l Set the unit to the power stand-by mode and then turn it back on.
            • l Set the unit to the power stand-by mode and then turn it back on.
            • l If the unit still malfunctions, reset it.
          • l No sound is heard.
            • l No sound is heard.
          • l Is the volume level set to “0”?
            • l Is the volume level set to “0”?
          • l Are the headphones connected?
            • l Are the headphones connected?
          n Remote control
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l The remote control does not operate.
            • l The remote control does not operate.
          • l Is the AC power cord of the unit plugged in?
            • l Is the AC power cord of the unit plugged in?
            • l Is the battery polarity correct?
            • l Are the batteries dead?
            • l Is the distance or angle incorrect?
            • l Does the remote control sensor receive strong light?
          n Tuner
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l The radio makes unusual noises continuously.
            • l The radio makes unusual noises continuously.
          • l Is the unit placed near the TV or computer?
            • l Is the unit placed near the TV or computer?
            • l Is the FM antenna or AM loop antenna placed properly? Move the antenna away from the AC power c...
          n CD player
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l Playback does not start.
            • l Playback does not start.
          • l Is the disc loaded upside down?
            • l Is the disc loaded upside down?
            • l Does the disc satisfy the standards?
            • l Is the disc distorted or scratched?
          • l Playback stops in the middle or is not performed properly.
            • l Playback stops in the middle or is not performed properly.
          • l Playback sounds are skipped, or stopped in the middle of a track.
            • l Playback sounds are skipped, or stopped in the middle of a track.
          • l Is the unit located near excessive vibrations?
            • l Is the unit located near excessive vibrations?
            • l Is the disc very dirty?
            • l Has condensation formed inside the unit?
          n iPod
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l No sound is produced. No image appears on the TV/monitor.
            • l No sound is produced. No image appears on the TV/monitor.
          • l The iPod is not playing.
            • l The iPod is not playing.
            • l The iPod is not properly connected to the unit.
            • l Is the AC power cord of the unit plugged in?
            • l The video cable is not properly connected.
            • l The TV/monitor’s input selection is not properly set.
          • l iPod will not charge
            • l iPod will not charge
          • l Wrong iPod adaptor is used.
            • l Wrong iPod adaptor is used.
            • l The iPod is not making full contact with the iPod connector.
              • l The iPod is not making full contact with the iPod connector.
              • l The main unit is in stand-by mode.
          n Condensation

          • Sudden temperature changes, storage or operation in an extremely humid environment may cause cond...
          • Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc ...
          References

          • n If trouble occurs
            • When this product is subjected to strong external interference (mechanical shock, excessive stati...
            • If such a problem occurs, do the following:
              • If such a problem occurs, do the following:
            • 1 Set the unit to the stand-by mode and turn the power on again.
              • 1 Set the unit to the stand-by mode and turn the power on again.
                • 1 Set the unit to the stand-by mode and turn the power on again.
                  • 1 Set the unit to the stand-by mode and turn the power on again.
            • 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then tu...
              • 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then tu...
                • 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then tu...
                  • 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then tu...
              • If neither operation above restores the unit, clear all the memory by resetting it.
          • n Clearing all the memory (reset)
            • 1 Press the ON/STAND-BY button to enter the power stand-by mode.
              • 1 Press the ON/STAND-BY button to enter the power stand-by mode.
                • 1 Press the ON/STAND-BY button to enter the power stand-by mode.
                  • 1 Press the ON/STAND-BY button to enter the power stand-by mode.
            • 2 While pressing down the SNOOZE/DIMMER button and the E SOUND/DEMO button, press the ON/STAND-BY...
              • 2 While pressing down the SNOOZE/DIMMER button and the E SOUND/DEMO button, press the ON/STAND-BY...
                • 2 While pressing down the SNOOZE/DIMMER button and the E SOUND/DEMO button, press the ON/STAND-BY...
                  • 2 While pressing down the SNOOZE/DIMMER button and the E SOUND/DEMO button, press the ON/STAND-BY...
            • • This operation will erase all data stored in memory including clock, alarm settings and tuner pre...
          • n Before transporting the unit
            • Remove the iPod and the disc from the unit. Then, set the unit to the power stand-by mode. Carryi...
          Maintenance

          • n Cleaning the cabinet
            • Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
              • l Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet fi...
                • l Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet fi...
                  • l Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet fi...
                    • l Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet fi...
              • l Do not apply oil to the inside of the unit. It may cause malfunctions.
                • l Do not apply oil to the inside of the unit. It may cause malfunctions.
                  • l Do not apply oil to the inside of the unit. It may cause malfunctions.
                    • l Do not apply oil to the inside of the unit. It may cause malfunctions.
          Specifications

          • As part of our policy of continuous improvement, SHARP reserves the right to make design and spec...
          • n General
          • Power source
            • Power source
              • Power source
          • AC 120 V, 60 Hz
            • AC 120 V, 60 Hz
          • Power consumption
            • Power consumption
              • Power consumption
          • 33 W
            • 33 W
          • Output power
            • Output power
              • Output power
          • Front speakers: RMS: 4W (2W + 2W) (10% T.H.D.) Subwoofer: RMS: 10W (5W + 5W) (10% T.H.D.)
            • Front speakers: RMS: 4W (2W + 2W) (10% T.H.D.) Subwoofer: RMS: 10W (5W + 5W) (10% T.H.D.)
          • Speaker
            • Speaker
          • 1-way type light-up speaker system
            • 1-way type light-up speaker system
            • Front Speaker: 2-1/2"(6.5 cm) - 12 ohms - Full Range
            • Subwoofer: 4" (10 cm) - 8 ohms - Full Range
          • Speaker maximum input power
            • Speaker maximum input power
          • Front Speakers: 4W
            • Front Speakers: 4W
            • Subwoofer: 10W
          • Speaker rated input power
            • Speaker rated input power
          • Front Speakers: 2W
            • Front Speakers: 2W
            • Subwoofer: 5W
          • Output terminals
            • Output terminals
              • Output terminals
          • Headphones: 16 - 50 ohms (recommended: 32 ohms)
            • Headphones: 16 - 50 ohms (recommended: 32 ohms)
            • Video output: 1Vp-p
          • Input terminals
            • Input terminals
              • Input terminals
          • Auxiliary (audio signal): 500 mV/47 k ohms
            • Auxiliary (audio signal): 500 mV/47 k ohms
          • Dimensions
            • Dimensions
              • Dimensions
          • Width: 19-11/16" (500 mm)
            • Width: 19-11/16" (500 mm)
            • Height: 5-7/8" (150 mm)
            • Depth: 9-7/8" (250 mm)
          • Weight
            • Weight
              • Weight
          • 11.7 lbs. (5.3 kg)
            • 11.7 lbs. (5.3 kg)
          n Tuner
          • Frequency range
            • Frequency range
              • Frequency range
          • FM: 87.5 - 108 MHz
            • FM: 87.5 - 108 MHz
            • AM: 530 - 1,720 kHz
          Popular Brands

          • Apple
          • Bissell
          • Brother
          • Canon
          • Casio
          • Cisco
          • Craftsman
          • Dell
          • FRIGIDAIRE
          • Garmin
          • GE
          • Honeywell
          • HP
          • John Deere
          • Kenmore
          • LG
          • Maytag
          • Motorola
          • NETGEAR
          • Nikon
          • Panasonic
          • Pioneer
          • Samsung
          • Sharp
          • SINGER
          • Sony
          • Whirlpool
          • Yamaha

          Popular manuals

          • Canon - AE-1
          • Fitbit - Flex
          • Nikon - D5000
          • Nikon - D40
          • Nikon - D3100
          • Nikon - D90
          • Nikon - D7000
          • Nikon - D80
          • Nikon - D3000
          • HP - Officejet Pro 8600
          • Canon - EOS 60D
          • HP - 12C Financial calculator