LG LFD22860 Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for LFD22860 LG
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 35 |
| Size: | 540 KB |
Show table of contents
Document Outline
- United States of America
- CUSTOMER ASSISTANCE NUMBERS:
- Período de Garantía del refrigerador/Congelador LG
- A DANGER
- A WARNING
- A CAUTION
- A DANGER: RISK OF CHILD ENTRAPMENT
- BEFORE YOU THROW AWAf YOUR OLD REFRIGERATOR OR FREEZER
- IMPORTANT: Please read carefully. TO CONNECT electricity
- RECOMMENDED GROUNDING METHOD
- USE OF EXTENSION CORDS
- UNmCKINGYOUR REFRIGERATOR
- IjsjSTALLATION
- NEXT
- BASE GRILLE
- HOWTO REMOVE DOOR HANDLES
- HOWTO REPLACE DOOR HANDLES
- HOWTO rei\^oVE piEpf^iQ^f^^jOR DOOR (models without water dispenser)
- replacing repriqerajoR doors (models with water dispenser}
- HOWTO REMOVE AND INSTALL THE PULLOUT DRAWER
- LEVELING AND poOR ALIGNMENT
- ENSURING proper AIR CIRCULATION
- MULTI-FLOW
- DOOR ALARM
- SETTING THE CONTROLS (Models without water dispenser)
- ADJUSTING CONTROL SETTINGS
- STORING frozen FOOD
- REFRIGERATOR SECTION
- FREEZER SECTION
- ICE BIN (on some models)
- TILTING DOOR (on some models)
- DURABASE (on some models)
- FILTER (on some models)
- GENERAL CLEANING TIPS
- OUTSIDE
- INSIDEWALLS (allow freezer to warm up so cloth won’t stick)
- DOOR LINERS AND GASKETS
- PLASTIC PARTS (covers and panels)
- CONDENSER COILS
- POWER INTERRUPTIONS
- WHEN YOU GO ON VACATION
- WHEN YOU MOVE
- ABOUT THE AUTOMATIC ICEMAKER
- INSTALLATION INSTRUCTIONS
- INSTALLATION INSTRUCTIONS (CONTINUED)
- 4. FASTEN THE SHUTOFF VALVE
- 5. TIGHTEN THE PIPE CLAMP
- 7. CONNECT THE TUBING TO THE VMVE
- 8. FLUSH OUT THE TUBING
- 9. CONNECT THE TUBING TO THE REFRIGERATOR
- 11.PLUG IN THE REFRIGERATOR
- 12.START THE ICEMAKER
- 10.TURN THE WATER ON AT THE SHUTOFF VAUJE
- UNDERSTANDING SOUNDS YOU MAY HEAR
- REFRIGERATOR DOES NOT OPERATE
- COMPRESSOR MOTOR SEEMS TO RUN TOO MUCH
- FROST OR ICE CRYSTALS ON FROZEN FOOD
- THERE ISWWER IN THE DEFROST DRAIN FAN
- AUTOMATIC ICEMAKER DOES NOT WORK
- TEMPERATURE IS TOO WARM OR THERE IS INTERIOR MOISTURE BUILDUP