Specifications, General specifications – Harman-Kardon AVR 3650 User Manual
Page 44
AVR
44
Specifications
Audio Section
Stereo power:
AVR 3650/AVR 365: 110W per channel, two channels
driven @ 8 ohms, 20Hz – 20kHz, <0.09% THD
AVR 2650/AVR 265: 95W per channel, two channels
driven @ 8 ohms, 20Hz – 20kHz, <0.09% THD
Multichannel power:
AVR 3650/AVR 365: 110W per channel, two channels
driven @ 8 ohms, 20Hz – 20kHz, <0.09% THD
AVR 2650/AVR 265: 95W per channel, two channels
driven @ 8 ohms, 20Hz – 20kHz, <0.09% THD
Input sensitivity/impedance:
200mV/47k ohms
Signal-to-noise ratio (IHF-A):
100dB
Surround system adjacent
channel separation:
Dolby Pro Logic/DPLII: 40dB
Dolby Digital: 55dB
DTS: 55dB
Frequency response (@ 1W):
10Hz – 130kHz (+0dB/–3dB)
High instantaneous current
capability (HCC):
±35 amps
Transient intermodulation
distortion (TIM):
Unmeasurable
Slew rate:
40V/μsec
Specifications
FM Tuner Section
Frequency range:
87.5 – 108.0MHz
Usable sensitivity IHF:
1.3μV/13.2dBf
Signal-to-noise ratio (mono/stereo):
70dB/68dB
Distortion (mono/stereo):
0.2%/0.3%
Stereo separation:
40dB @ 1kHz
Selectivity (±400kHz):
70dB
Image rejection:
80dB
IF rejection:
90dB
AM Tuner Section
Frequency range:
520 – 1710kHz (AVR 3650/AVR 2650)
522 – 1620kHz (AVR 365/AVR 265)
Signal-to-noise ratio:
45dB
Usable sensitivity (loop):
500μV
Distortion (1kHz, 50% mod):
0.8%
Selectivity (±10kHz):
30dB
Video Section
Television format:
NTSC (AVR 3650/AVR 2650);
PAL (AVR 365/AVR 265)
Input level/impedance:
1Vp-p/75 ohms
Output level/impedance:
1Vp-p/75 ohms
Video frequency response
(composite video):
10Hz – 8MHz (–3dB)
HDMI:
Version 1.4a with 12-bit Deep Color
General Specifications
Power requirement:
120V AC/60Hz (AVR 3650/AVR 2650);
220V – 240V AC/50Hz – 60Hz (AVR 365/AVR 265)
Power consumption:
<0.5W (standby);
480W maximum (AVR 3650/AVR 365);
420W maximum (AVR 2650/AVR 265)
Dimensions (W x H x D):
17-5/16" x 6-1/2" x 17-1/8"
(440mm x 165mm x 435mm)
Weight
(AVR 3650/AVR 365): 27.25 lb (12.4kg)
(AVR 2650/AVR 265): 24.4 lb (11.1kg)
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.