Harman-Kardon AVR 3650 - Manual (Page 19)

19
Making Connections
AVR
Connect Your HDMI Devices
If any of your source devices have HDMI connectors, using them will provide the best
possible video and audio performance quality. Since the HDMI cable carries both digital
video and digital audio signals, you do not have to make any additional audio connections
for devices you connect via an HDMI cable.
HDMI Cable
(not supplied)
To HDMI
Output
Receiver
HDMI Connectors
HDMI-Equipped
Source Device
HDMI Cable
(not supplied)
To HDMI
Output
NOTE: If you have HDMI devices (such as an Internet connection) already connected
directly to your TV, you can feed their sound to the AVR via the HDMI Monitor Out
connector’s Audio Return Channel, and they will not require additional connections to
the AVR.
Connect Your Component Video Devices
If any of your video source devices have component video connectors (and do not have
HDMI connectors), using the component video connectors will provide superior video
performance. You will also need to make an audio connection from the device to the
receiver.
Component Video
Cable (not supplied)
To Component Video
Outputs
Receiver
Video Connectors
Component Video-Equipped
Source Device
Component Video
Cable (not supplied)
To Component Video
Outputs
Connect Your Composite Video Devices
Use composite video connectors for video source devices that don’t have HDMI or
component video connectors. You will also need to make an audio connection from the
source device to the receiver.
Composite Video
Cable (not supplied)
To Composite Video
Output
Receiver
Video Connectors
Composite Video-Equipped
Source Device
Composite Video
Cable (not supplied)
To Composite Video
Output
Connect Your Optical Digital Video Devices
If your non-HDMI source devices have optical digital outputs, connect them to the AVR’s
optical digital audio connectors. NOTE: Make only one type of digital connection (HDMI,
optical or coaxial) from each device.
Optical Digital Audio
Cable (not supplied)
To Optical Digital Audio
Output
Receiver
Digital Audio Connectors
Optical Digital-Equipped
Source Device
Optical Digital Audio
Cable (not supplied)
To Optical Digital
Audio Output
Connect Your Coaxial Digital Audio Devices
If your non-HDMI source devices have coaxial digital outputs, connect them to the AVR’s
coaxial digital audio connectors. NOTE: Make only one type of digital connection (HDMI,
optical or coaxial) from each device.
g
Coaxial Digital Audio
Cable (not supplied)
To Coaxial Digital Audio
Output
Coaxial Digital Audio
Cable (not supplied)
To Coaxial Digital
Audio Output
Coaxial Digital-Equipped
Source Device
Receiver
Digital Audio Connectors
Connect Your Analog Audio Devices
Use the AVR’s analog audio connectors for source devices that don’t have HDMI or digital
audio connectors. NOTE: If you’re installing a multizone system, make analog audio
connections for any source devices you want to be able to listen to in Zone 2. Only analog
sources are available in Zone 2.
Receiver
Analog Audio Connectors
Stereo Audio
Cable (not supplied)
To Stereo Analog Audio
Output
Stereo Audio Cable
(not supplied)
To Stereo Analog
Audio Output
Analog Source Device
Receiver
Analog Audio Connectors