Husqvarna 210 C - Manual (Page 42)

English - 43
8. TROUBLE SHOOTING
8.2 Fault symptom
If your Automower does not work correctly, follow the trouble shooting guide below. If the fault persists;
contact your dealer.
Symptom Cause Action
Uneven mowing
results Automower works too few hours per
week. Increase the mowing time.
Working area too large. Try limiting the working area or
extending the mowing time.
Dull blades. Replace all the blades and screws so
that the rotating parts are balanced.
Long grass in relation to the set
cutting height. Increase the cutting height and then
successively lower.
Accumulation of grass by the blade
disc or around the motor shaft. Check that the skid plate and blade
disc rotate easily. If not, the skid plate
and perhaps the blade disc must be
removed and the grass and foreign
objects removed. See 7.4 Cleaning
on page 39.
Automower vibrates Unbalanced blade disc or damaged
blades. Inspect the blades and screws and
replace them if necessary.
The mower mows for
shorter periods than
usual Grass or a foreign object is blocking
the blade disc or skid plate. Dismantle and clean the skid plate
and blade disc.
This behaviour is normal in high
temperatures (gradually increasing
above 25°C). No action.
The battery is spent. Contact your dealer to check and
replace the battery.