Husqvarna 210 C - Manual (Page 21)

22 - English
3. INSTALLATION
Secondary areas
It is recommended to create a secondary area when
the working area is made up of two areas that are
joined by a passage where the distance between the
boundary wires is less than 60 cm. Run the boundary
wire then around the secondary area so that it forms
an island outside of the main area.
Automower must be moved manually between the
main and secondary areas.
Instead of forming an island with the boundary wire, it
can be beneficial to use an extra loop
generator/charger together with an extra boundary
wire. A loop generator/charger can be purchased as
an accessory. Contact your dealer for further
information.
Slopes
The boundary wire can be laid across a slope that
slants less than 10 %.
The boundary wire should not be laid across a slope
that is steeper than 10 %. There is a risk of
Automower finding it difficult to turn, and being unable
to move. The risk is at its greatest in damp weather
conditions, as the wheels can slip on the wet grass.
However, the boundary wire can be laid across a
slope steeper than 10 % when there is an obstacle
that Automower can be permitted to collide with, for
example, a fence or a dense hedge.
3012-682
Secondary
area
Main area
3012-767
3012-768