HP 32SII - Manual (Page 312)

B–4 User Memory and the Stack
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24 Size : 17.7 x 25.2 cm
1. Press and hold down the † key.
2. Press and hold down < .
3. Press 6 . (You will be pressing three keys simultaneously). When you
release all three keys, the display shows & if the operation
is successful.
Category CLEAR ALL MEMORY CLEAR
(Default)
Angular mode Unchanged Degrees
Base mode Unchanged Decimal
Contrast setting Unchanged Medium
Decimal point Unchanged " ) "
Denominator (/c value) Unchanged 4095
Display format Unchanged FIX 4
Flags Unchanged Cleared
Fraction–display mode Unchanged Off
Random–number seed Unchanged Zero
Equation pointer EQN LIST TOP EQN LIST TOP
Equation list Cleared Cleared
FN = label Null Null
Program pointer PRGM TOP PRGM TOP
Program memory Cleared Cleared
Stack lift Enabled Enabled
Stack registers Cleared to zero Cleared to zero
Variables Cleared to zero Cleared to zero
Memory may inadvertently be cleared if the calculator is dropped or if power
is interrupted.
The Status of Stack Lift
The four stack registers are always present, and the stack always has a
stack–lift status. That is to say, the stack lift is always enabled or disabled
regarding its behavior when the next number is placed in the X–register.
(Refer to chapter 2, "The Automatic Memory Stack.")