HP ProLiant ML370 - Manual (Page 48)

is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
Non-operating -30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing) Operating 10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, non-
condensing.
Non-operating 10 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude Operating 3048 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating 9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
L WAd 4.6 B for 1P Non-Redundant; 4.9 B for 2P
Redundant
L pAm 28 dB for 1P Non-Redundant; 31 dB for 2P
Redundant
Operating
L WAd 4.7 B for 1P Non-Redundant; 5.0 B for 2P
Redundant
L pAm 29 dB for 1P Non-Redundant; 32 dB for 2P
Redundant
NOTE: The Listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels.
Emissions
Classification (EMC) FCC Rating Class B
Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.
QuickSpecs
HP ProLiant ML370 Generation 6
Technical Specifications
DA - 13242 Worldwide QuickSpecs — Version 21 — 3-29-2010 Page 48