Quickspecs – HP ProLiant ML370 User Manual

Page 17

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE: FIO indicates that this option only available as a Factory Installable Option.

Step 1: Base Configuration (choose one of the following configurable models)

HP Models

HP ProLiant ML370 G6 Tower Models

HP ProLiant ML370 G6 SFF CTO Chassis

NOTE: Supports Small Form Factor (SFF) - 2.5" Drives

483880-B21

Factory Integrated Model ships with:

HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
Integrated Lights-Out embedded
HP Smart Array P410i/Zero Memory Controller
(8) Hot-Plug (SFF) SAS/SATA Drive Bays
(9) available PCI-e Gen2 slots
(5) USB ports
(3) Hot Plug Fans
Tower Form Factor

HP ProLiant ML370 G6 Tower CTO Chassis

HP ProLiant ML370 G6 LFF CTO Chassis

NOTE: Supports Large Form Factor (LFF) - 3.5" Drives

483879-B21

Factory Integrated Model ships with:

HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
Integrated Lights-Out embedded
HP Smart Array P410i/Zero Memory Controller
(6) Hot-Plug (LFF) SAS/SATA Drive Bays
(9) available PCI-e Gen2 slots
(5) USB ports
(3) Hot Plug Fans
Tower Form Factor

HP ProLiant DL370 G6 Rack Models

HP ProLiant DL370 G6 SFF CTO Chassis

NOTE: Supports Small Form Factor (SFF) - 2.5" Drives

483874-B21

Factory Integrated Model ships with:

HP ProLiant DL370 G6 LFF CTO Chassis

NOTE: Supports Large Form Factor (LFF) - 3.5" Drives

483873-B21

Factory Integrated Model ships with:

QuickSpecs

HP ProLiant ML370 Generation 6

Configuration Information - Factory Integrated Models

DA - 13242 Worldwide QuickSpecs — Version 21 — 3-29-2010

Page 17