HP C6734A User Manual
Page 19
Chapter 5Load paper or transparency film, or load originals
15
HP OfficeJet G Series
5
Push the input tray back in until it stops.
6
To prevent paper from possibly falling off the tray, pull out the output-tray extender.
Review tips for loading specific types of paper
The following sections provide guidelines for loading certain types of paper and film. For
best results, adjust the paper settings each time you change paper types. For more
information, see Set the paper type.
HP papers
HP Premium Inkjet Paper: Locate the gray arrow on the nonprinting side of the
paper, and insert paper with the arrow side facing up.
HP Premium Photo Paper: Load the glossy (print) side down. Always load at least
five sheets in the input tray. You can place the photo-paper sheets on top of plain
paper in the input tray.
HP Premium Plus Photo Paper: Always load at least five sheets in the input tray. You
can place the photo-paper sheets on top of plain paper in the input tray.
HP Premium or Premium Rapid-Dry Inkjet Transparency Film: Insert the film so
that the white transparency strip, with arrows and the HP logo, is on top and is
going into the tray first.
AvMac.book Page 15 Friday, June 23, 2000 10:34 AM