Hitachi CMP307XU - Manual (Page 27)

25
ENGLISH
Press the MENU button to cancel sound mode.
The power save mode is activated when this
mode is canceled.
When an input signal is present, the sound mode is
canceled automatically, the On mode is activated
and the input signal is displayed.
RGB sync
signal
Horizontal Yes No Yes No
Vertical Yes Yes No No
Video signal
Active
(normal display)
Blank (no video)
Operation mode On
Display lamp Lights green Blinks green
Video signal Yes No
Operation mode On Off 1)
Screen display Normal display Blank (no video)
Display lamp Lights green Blinks green
1) Press the MENU or SELECT button to enter sound mode. 25
If you press the MENU mode while the monitor has power save mode turned off, sound
output is enabled by cancelling the off setting of power save mode.
The Easy Menu shown to the right appears on the screen when the sound mode is selected.
After approximately 5 sec., the brightness of the
Easy Menu lowers and display continues until the
sound mode is canceled.
In sound mode, sound volume can be adjusted.
SOUND MODE
25
25
MENU
Remote
controller POWER SAVE
MENU
Remote
controller
When the RGB input jack is selected
This unit meets the power-saving requirements of VESA and International Energy Program.
When this unit is connected to a VESA DPMS computer, the Power Save (Standby/Suspend/Off) mode
can be set to be activated automatically when the computer is not being used to reduce power
consumption by this unit.
When the Video Input jack is selected
When there is no video signal input, the power-saving system operates to reduce the power consumed
by the sunit.
Power consumption 390W 7W or less
Off 1)
1) Press the MENU or SELECT button to enter sound mode. 25
Power consumption 390W 7W or less
Power Save Mode
Sound Mode