Operating instructions (continued), On-screen display system, easymenu, English – Hitachi CMP307XU User Manual

Page 18: Hints

ENGLISH

OPERATING INSTRUCTIONS (continued)

Press the SELECT buttons (remote controller

and

keys) to move the pink marker to

select an item.
Press the VOLUME button and the ▲ and ▼
keys of the main unit (

key of the

remote control) to adjust or set the selected
item, or to switch the menu.

When a choice is followed by “:”, it indicates that the

choice can be adjusted or changed.

When a choice is followed by

▲

, a menu can be opened

by pressing the remote-controller SELECT button

the set VOLUME button

▲

When [RETURN] is selected, press the remote-

controller button SELECT

or the set VOLUME

button

▼

to exit to the original menu

For information on adjusting and setting
choices, see to .

PICTURE
SOUND
DISPLAY
FUNCTION

MAIN MENU

SELECT

Remote

controller

CONTRAST

:117

BRIGHTNESS

COLOR SELECT:NORMAL
COLOR BALANCE
OPTIONS
RETURN

PICTURE MENU

Pink

Pink when brightness
is selected

Guidance

Press the MENU button once again to exit the adjustment menu.

The adjustment menu will close automatically when no keys are entered for 10 seconds.

Press the MENU button to open an adjustment menu allowing you to complete various
adjustments and settings using the SELECT buttons (remote controller

, and

keys, or the set SELECT key).

Set unit

SELECT

[ VOLUME ]

Menu selection mark

HINTS

■

Burn-in (residual image) can occur if the same image is displayed for an
extended time. To reduce this possibility, change the display contents at suitable
intervals. To reduce this, it is recommended that you either change the display
contents at an appropriate interval or use the Burn In function .

■

If special images created on a PC or any other equipment (such as those
composed of a checker-flag pattern) are displayed across the screen, the hue may
be varied depending on the contrast or brightness setting.

On-Screen Display System, EasyMenu