Hitachi CMP307XU - Manual (Page 24)

22
ENGLISH
OTHER FEATURES
Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown
in the table below.
The previously recorded items will be lost.
The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal
polarity. Different signals with which all the elements are the same or similar will be handled as the
same signal.
RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode. Because
of this, when the contents are recorded with RGB1 (or RGB2), there may be loss of adjustment
during RGB2 (or RGB1) reception in the same signal mode.
Item Registration condition Reproduction condition
Sound volume
Sound balance
Treble
Bass
Mute volume
Input status automatic display
Half tone
Enlargement
Line correction
Three-dimensional Y/C separation
HD signal
Input select
One set can be recorded.
During normal signal
reception.
Brightness
Contrast
Gamma correction
Input signal level
Display area
One set can be recorded
during common RGB1, RGB2
input; one set of two can be
recorded during normal signal
reception with common
VIDEO 1, VIDEO 2 input.
During normal signal
reception.
Horizonal position
Vertical position
Dot clock frequency
Dot clock phase
One group can be recorded
for each signal mode.
During recording and
when the same signal
mode is detected.
Display
VOLUME
BALANCE
TREBLE
BASS
MUTE VOLUME
EASY MENU
HALF TONE
INTERPOLATION
LINE CALE
3D Y/C
COMPONENT
INPUT SELECT
BRIGHTINES
CONTRAST
GAMMA
VIDEO LEVEL
DISPLAY AREA
H.POSITION
V.POSITION
CLOCK
PHASE
Automatic Store