HP Integrity BL870c - Manual (Page 19)

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Enclosure
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration
Base Unit HP Integrity BL870c Server Blade
NOTE: Choose the base models.
NOTE: Adding Option code "#0D1" to the Server Blade P/N will integrate the
configured blade into the enclosure (which must be on the same order)
AH232A
Base unit standard features:
Four embedded Gigabit Ethernet NIC ports plus (1) additional 10/100 NIC
dedicated to Integrity iLO 2 Management
Integrated LSI 1068 hardware RAID controller
Four small form factor (SFF) SAS hot plug hard drive bays
HP Integrity Integrated Lights-Out 2 Advanced Pack
Support for up to 96GB memory with support for 24 DIMM slots
Support for up to three c-Class mezzanine cards
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted):
Processors
(Select minimum one (1)
and maximum four (4)
processors)
Intel® Itanium® Dual-Core Processors Model 9150N (1.6 GHz, 24MB, 533FSB,
L3 cache) AH320A
Intel® Itanium® Dual-Core Processors Model 9140N (1.6 GHz, 18MB, 533FSB,
L3 cache) AH255A
Intel® Itanium ® Dual-Core Processors Model 9120N (1.42 GHz, 12MB.
533FSB, L3 cache) AH256A
Memory
(Select minimum one (1)
and maximum six (6)
memory modules)
4GB PC2-4200 DDR2-5300 Quad Memory AH252A
8GB PC2-4200 DDR2-5300 Quad Memory AH253A
16GB PC2-4200 DDR2-5300 Quad Memory AH254A
NOTE: Memory Modules consist of four individual DIMMs
NOTE: DIMMs must be installed in quads
HP c-Class Enclosures
(Select minimum one (1)
enclosures)
c7000 BCS c-Class Enclosure, FIO AD361B
c3000 BCS c-Class Enclosure, FIO AH257A
QuickSpecs
HP Integrity BL870c Server Blade
Configuration Information - Factory Integrated Models
DA - 12926 Worldwide QuickSpecs — Version 1 — 2.11.2008 Page 19