Quickspecs, Hp proliant dl585 generation 2 storage – HP DL585 User Manual
Page 37
below, please see the following:
NOTE: For complete listing of tape drive offerings see
NOTE: SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied
with tape drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs
into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard
drive cage would mean drive bay 8 is deactivated.
Position
Supported
Controller
Controller Part
Number
HP StorageWorks SCSI
Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-2 Ultrium 460
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
DLT VS160
SDLT 600
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP SC11Xe Host Bus Adapter
412911-B21
HP StorageWorks USB
Tape Drives, External
DAT 40 USB
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit
External
USB 2.0 Port
N/A
HP StorageWorks SAS
Tape Drives, External
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
1U Rack-Mount Kit
External
HP SC44Ge Host Bus Adapter
NOTE: Recommended.
416096-B21
HP Smart Array E500 Controller
435129-B21
NOTE: The following SAS Smart Array controllers require
ROM Flash version 2.04 or higher for SAS tape support:
HP Smart Array P400/256MB Controller
405132-B21
HP Smart Array P400/512MB Controller
411064-B21
HP StorageWorks SCSI
Tape Automation,
External
DAT 72x10 Autoloader
1/8 Tape Autoloader
MSL2024
MSL4048
MSL8096
MSL6000
External
HP SC11Xe Host Bus Adapter
412911-B21
HP U320e SCSI Host Bus Adapter
NOTE: Only valid for MSL tape libraries.
AH627A
QuickSpecs
HP ProLiant DL585 Generation 2
Storage
DA - 12575 U.S. QuickSpecs — Version 28 — 11/27/2007
Page 37