Humminbird 947C - Manual (Page 76)

SETUP MENU TAB
From any view, press the MENU key twice to
access the tabbed Main Menu System, then press
the RIGHT cursor key until the Setup tab is
selected.
NOTE: Menu choices will vary depending on system
settings such as whether the unit is set for Advanced
User mode and what accessories are attached to the
unit.
UNITS - DEPTH
Units - Depth selects the units of measure
for all depth-related readouts.
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth
setting. (Meters [International models only], Feet, Fathoms; Default is Meters
for International models, and Feet for Domestic models)
UNITS - TEMP
(International only)
Units - Temp selects the units of measure for all temperature-related readouts.
International models only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp
setting. (Celsius, Fahrenheit; Default = Celsius)
Setup Menu
71
531374-1_A - 947 Man.qxd 2/15/2005 7:54 PM Page 76