Returning to default settings – HP LT3700 User Manual
Page 53
Changing the TV Settings
43
To change an input label by using the remote control:
1
Press the Menu button to open the OSD. The
available menus appear as a list.
2
Press the down arrow button to highlight the
Setup menu, and then press the OK button.
3
Press the down arrow button to move within the
menu and highlight the Input Labels option, and
then press OK to move into the option.
4
Press the down arrow button to highlight the input
source that you want to change, and then press the
right arrow button. Press the down arrow button to
select the new label, and then press OK to enter
the change.
5
When you are finished, press the Menu button to
close the OSD.
Returning to Default Settings
You can use the Default Settings menu to return all
settings, including the input labels, to the default value.
Select Default Settings, and then press the OK
button.
This option does not reset the channels in the Fav and
the channel list. These items are cleared only when you
run a new channel scan.
- LT4200 Televisión de alta definición HP LT3200 Professional LCD de 32 pulgadas Televisión de alta definición HP LT3700 Professional con LCD de 37 pulgadas Televisión de alta definición profesional HP LT4700 LCD de 47 pulgadas Televisión de alta definición profesional HP LT4200 LCD de 42 pulgadas LT4200 42 inch Professional LCD HDTV LT3200 32 inch Professional LCD HDTV LT3700 37 inch Professional LCD HDTV LT4700 47 inch Professional LCD HDTV