Humminbird ] 981 - Manual (Page 82)

76
USER MODE
User Mode sets the menu system to either
Normal or Advanced. When set to Normal, only the basic menu options are shown.
When set to Advanced (default setting), additional menu choices are available.
To change the User Mode setting:
1. Highlight User Mode on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode
setting. (Normal, Advanced, Default = Advanced)
LANGUAGE
(International only)
Language selects the display language for menus. International Models Only.
To change the Language setting:
1. Highlight Language on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language
setting. (Default = English)
TRIPLOG RESET
(With Speed input only)
Triplog Reset resets the Triplog to zero. The Triplog provides the following information:
timer for elapsed time, distance traveled since last reset, and average speed.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor
key once more. To cancel Reset Triplog, press the LEFT Cursor key.
RESTORE DEFAULTS
Restore Defaults resets ALL menu settings
to their factory defaults. Use this menu choice with caution!
To Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor
key once more. To cancel Restore Defaults, press the LEFT Cursor key.
98x_Manual_531376-1_A.qxd 2/23/2005 11:41 AM Page 82