Humminbird Matrix 531338-1_A - Manual (Page 27)

48 47
Triplog Reset
(with Temp/Speed or GPS Receiver)
Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/Speed
Accessory is connected and the paddlewheel has moved at least once, or if a GPS Receiver is
connected. The Triplog provides the following information: timer for elapsed time, distance
traveled since last reset, and average speed.
NOTE: See Setup Menu Tab: Select Readouts to find out how to display Triplog information on
the screen.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT
4-WAY Cursor Control key once more. To cancel Reset Triplog, press the LEFT 4-WAY
Cursor Control key.
Restore Defaults
Restore Defaults resets ALL menu settings to their factory
defaults. Use this menu choice with caution!
To Restore Defaults:
1. Highlight Restore Defaults on the Setup main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT
4-WAY Cursor Control key once more. To cancel Restore Defaults, press the LEFT 4-
WAY Cursor Control key.
Select Readouts
(Advanced: 3D and 2D Sonar Views Only)
Select Readouts sets individual digital readouts on the 3D or 2D Sonar View. This Advanced
feature allows you to select what data will be displayed in each of 6 fixed-position data
windows arranged around the left and bottom edges of the 3D or 2D Sonar View screen, or
whether a particular data window will be turned off, displaying nothing in that area; you can
access this menu choice only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
Data windows can display readouts from supported
accessories such as Temp/Speed. Each data window
can either be empty or contain one of the following:
- Speed (will be displayed if a Temp/Speed Accessory
is attached and the paddlewheel has moved at least
once, or if a GPS Receiver is connected)
- Temperature
- Triplog (will be displayed if a Temp/Speed Accessory
is attached and the paddlewheel has moved at least
once, or if a GPS Receiver is connected)
- Voltage
- Water Speed (will only be displayed if a
Temp/Speed Accessory is attached and the
paddlewheel has moved at least once). Water Speed
is not available with a GPS receiver.
Select Readouts
M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 52