beautypg.com

Units - speed, User mode, Language – Humminbird Matrix 531338-1_A User Manual

Page 26: Units - depth, Units - temp, Units - distance

background image

45

46

Units - Speed

(with Temp/Speed or GPS Receiver)

Units - Speed selects the unit of measure for speed-related readouts, and will appear in the
menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once,
or if a GPS Receiver is connected.

To change the Units - Speed setting:

1. Highlight Units - Speed on the Setup main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting.

(kph [International Models Only], mph, kts, Default = kph for International models
and mph for Domestic models)

User Mode

User Mode sets the menu system to either Normal or

Advanced. When set to Normal (default setting,) only the basic menu options are shown.
When set to Advanced, additional menu choices are available throughout the menu system.

To change the User Mode setting:

1. Highlight User Mode on the Setup main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting.

(Normal, Advanced, Default = Normal)

Language

(International Only)

Language selects the display language for menus. International Models Only.

To change the Language setting:

1. Highlight Language on the Setup main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting.

(Default = English)

Units - Depth

Units - Depth selects the unit of measure for all depth-related
readouts.

To change the Units - Depth setting:

1. Highlight Units - Depth on the Setup main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth

setting. (Meters [International Models Only], Feet, Fathoms; Default is Meters for
International models, and Feet for Domestic models)

Units - Temp

(International Only)

Units - Temp selects the unit of measure for all temperature-related readouts. International
Models Only
.

To change the Units - Temp setting:

1. Highlight Units - Temp on the Setup main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting.

(Celsius, Fahrenheit; Default = Celsius)

Units - Distance

(with Temp/Speed or GPS Receiver)

Units - Distance selects the units of measure for all distance-related readouts, and will
appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has
moved at least once, or if a GPS Receiver is connected.

To change the Units - Distance setting:

1. Highlight Units - Distance on the Setup main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance

setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles;
International Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute
Miles, Feet/Nautical Miles; Default = Meters/Kilometers)

M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 50

This manual is related to the following products: