Humminbird Matrix 531338-1_A - Manual (Page 12)

X-Press™ Menu - Press the MENU key once for the Sonar X-Press™ Menu. The X-Press™ Menu
allows you to access frequently-used settings without having to navigate through the whole
menu system. When the X-Press™ Menu is displayed, you can use the UP or DOWN Cursor
keys to move to a particular menu choice. As soon as you alter a parameter (using the RIGHT
or LEFT Cursor keys) the X-Press™ Menu will collapse temporarily, and the screen will update
if it is affected by your menu setting change, allowing you to see the effects of your action
immediately. Reactivate the X-Press™ Menu by using the UP or DOWN Cursor keys.
Main Menu - Press the MENU key twice for the tabbed Main Menu System. The Main Menu
System is organized under tabbed headings to help you find a specific menu item quickly:
Alarms, Sonar, Setup, Views, and Accessories tabs are part of your tabbed Main Menu
System. Use the LEFT or RIGHT 4-WAY Cursor Control key to select a tab; then use the DOWN
or UP key to select the menu item, and the LEFT or RIGHT key to alter a menu setting.
4-WAY Cursor Control Key
The 4-WAY Cursor Control key has multiple functions, depending on the
situation:
• Use the DOWN or UP arrow keys to select a menu choice from the menu list,
• Use the LEFT or RIGHT arrow keys to change a menu setting.
• Press any arrow key to activate Freeze Frame while in the 2D Sonar View and then
use the 4-WAY Cursor Control key to position the cursor on the display.
• Press any arrow key to change the perspective in the 3D Sonar View. Subsequent
presses of the 4-WAY Cursor Control key rotate and tilt the 3D representation.
NOTE: Menu choices are implemented and saved immediately - no further action is required.
EXIT Key
The EXIT key has multiple functions, depending on the situation:
• If an alarm is sounding, pressing EXIT will cancel the alarm.
• If a menu tab is selected, pressing EXIT will exit the menu mode and return to the
view.
• If a menu is active, pressing EXIT will return to the previous level in the menu
system.
• Pressing EXIT will cycle through the available views in reverse order.
• If Freeze Frame is active, pressing EXIT will return to a scrolling display.
18 17
Key Functions
Your Matrix™ Fishing System user interface consists of a set of easy-to-use keys that work
with various on-screen views and menus to give you flexibility and control over your
fishing experience.
POWER/LIGHT Key
The POWER/LIGHT key is used to turn the Matrix™ Fishing System on and
off, and also to adjust the backlight and contrast of the display. Press the
POWER/LIGHT key to turn the unit on. The Title screen is then displayed until the Fishing
System begins sonar operation.
Your Fishing System will start up with the backlight on and will
automatically turn it off to conserve power. To turn the backlight on
for night fishing, or to adjust the display contrast, press the
POWER/LIGHT key to access the Light and Contrast menu. Use the
4-WAY Cursor key to select Light or Contrast and then use the LEFT or RIGHT Cursor key to
change the settings. Press EXIT to exit the Light and Contrast menu.
Press and hold the POWER/LIGHT key for 3 seconds to turn the unit off. A message will
appear telling you how many seconds there are until shutdown occurs. Your Fishing System
should always be turned off using the POWER/LIGHT key. This will ensure that shutdown
occurs properly and any menu settings will be saved.
VIEW Key
The VIEW key is used to cycle through all available views. Press the VIEW key
to advance to the next view. Repeatedly pressing VIEW cycles through all
views available. Views can be hidden to optimize the system to your fishing
requirements (see Views Menu Tab).
MENU Key
The MENU key is used to access the menu system.
Start-Up Options Menu - Press the MENU key during the power up sequence to view the
Start-Up Options menu.
M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:35 PM Page 22