Humminbird Matrix 531338-1_A - Manual (Page 24)

42
Depth Alarm
Depth Alarm sounds when the depth becomes equal to or less
than the menu setting.
To change the Depth Alarm setting:
1. Highlight Depth Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting.
(OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only], Default = OFF)
Fish ID Alarm
Fish ID Alarm sounds when your Matrix™ Fishing System
detects fish that correspond to the alarm setting. Fish ID
Alarm will only sound if Fish ID+™ is on.
To change the Fish ID Alarm setting:
1. Highlight Fish ID Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm
setting. (Off, All, Large/Medium, Large, Default = Off)
All
Large/Medium
Large
For example, if you've set the Fish ID Alarm to sound for Large fish only, the
Fish ID Alarm will sound when a large-sized fish is detected.
41
Alarms Menu Tab
From any view, press the MENU key twice to access the
Main Menu System. The Alarms tab will be the default
selection.
NOTE: When an alarm is triggered, you can silence it by
pressing any key. The alarm will be silenced, and will not be
triggered again until a new instance of the alarm condition is
detected.
Alarms Menu
M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 46