beautypg.com

Low battery alarm, Alarm tone, Setup menu tab – Humminbird Matrix 531338-1_A User Manual

Page 25

background image

44

43

Low Battery Alarm

Low Battery Alarm sounds when the input battery voltage is

equal to or less than the menu setting. The battery alarm will only sound for the battery that
is connected to the Matrix™ Fishing System. The Low Battery Alarm should be set to warn
you when the battery voltage drops below the safety margin that you have determined. For
instance, if you are running a trolling motor (battery operated), you would want to set the
Low Battery Alarm to sound before the battery voltage drops too low for it to be used to start
your main, gasoline-powered engine.

To change the Low Battery Alarm setting:

1. Highlight Low Battery Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm

setting. (Off, 8.5V - 13.5V, Default = Off)

Alarm Tone

Alarm Tone selects the pitch of the alarm sound. A brief tone
will be produced as you adjust the Alarm Tone so that you can
select the tone that you can hear best.

To change the Alarm Tone setting:

1. Highlight Alarm Tone on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting.

(High, Medium, Low, Default = Medium)

Setup Menu Tab

From any view, press the MENU key twice to access the
tabbed Main Menu System, then press the RIGHT
4-WAY Cursor Control key until the Setup tab is selected.

Setup Menu

M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 48

This manual is related to the following products: