HP Photosmart E327 - Manual (Page 9)

9 Getting started
2. Turn on the camera
To turn the camera on,
slide the lens cover open
until it clicks, uncovering
the lens. The Power/
Memory light on the back
of the camera turns on
solid green. The HP logo
also displays on the Image
Display as the camera
powers up.
To turn the camera off, slide the lens cover closed until it
clicks, covering the lens.
CAUTION: When sliding the lens cover, keep your fingers
clear of the lens. Fingerprints on the lens can impair the
quality of the picture. For information about cleaning the
lens, see Cleaning the camera on page 117.
3. Choose the language
The first time you turn the camera on, you are prompted to
choose a language.
1. Scroll to the language that you
want by using the
buttons on the Controller .
2. Press the button to select the
highlighted language.
TIP: If you need to change the language later, you can do
this with the Language setting in the Setup menu. See
Chapter 5, Using the Setup Menu.