HP Photosmart E327 - Manual (Page 62)

62 HP Photosmart E327 User Guide
Date & Time
This setting allows you to set the date/time format, as well as
the current date and time for the camera. This is usually
done when you first set up the camera; however, you may
need to re-set the date and time when you are travelling to
different time zones, after the camera has been without
power for an extended time, or if the date or time is
incorrect.
The date/time format chosen will be used to display the date
information in Playback. Also, the format chosen in this
setting is what is used in the Date & Time Imprint feature (see
Date & Time Imprint on page 36).
1. In the Setup Menu (page 59), select Date & Time.
2. In the Date & Time sub-menu,
adjust the value of the
highlighted selection by using
the buttons.
3. Press the buttons to move to
the other selections.
4. Repeat Steps 2 and 3 until the
correct date/time format, date, and time are set.
5. Press the button to save the setting and return to the
Setup Menu.
The date/time format setting remains in effect until it is
changed again, even when you turn the camera off. The
date and time settings also remain current as long as the
camera batteries that are installed have a charge, or the
batteries are removed for less than 10 minutes. If the camera
is without batteries for a prolonged period, you may be
prompted to update the date and time the next time you
power on the camera.