Quickspecs – HP ELITE 8000 User Manual
Page 40
HP ADD2 SDVO PCIe
DVI-D Adapter
Models
HP ADD2 SDVO DVI-D Out Adapter
Form Factor
Low-profile card
DVI-D Connector
Digital connection only
Dual Head Support
Yes, when used with the integrated VGA connector
Display Devices
Supported
HP L1740
HP L1940T
HP L2045W
HP LP1965
NOTE: These graphics adapters offer optimal performance with any display that meets
applicable VESA standards.
Color Depth
All modes support 8-bpp, 16-bpp, and 24-bpp color depths
Host Interface
Connector
Mechanically compliant with PCI-E standard
Complies with the Intel ADD2 and Intel Serial Digital Video Output
(SDVO) specifications
Dot Clock
165 MHz maximum
Display Modes
Supports display modes that require up to 165-MHz bandwidth on the
link, as shown in the following table.
Resolution
60-Hz LCD
60-Hz
75-Hz
85-Hz
Blanking
5% reduced
GTF
GTF
GTF
640 x 480
VGA
Yes
Yes
Yes
Yes
800 x 600
SVGA
Yes
Yes
Yes
Yes
1024 x 768
XGA
Yes
Yes
Yes
Yes
1280 x 1024
SXGA
Yes
Yes
No
No
1600 x 1200
UXGA
Yes
Yes
No
No
HP DisplayPort to DVI-
D Adapter
Connectors
DisplayPort and DVI-D single link connector
Adapter length
7.5 in (19.0 cm)
Adapter weight
.10 lbs (.05 kg)
HP DisplayPort to VGA
Adapter
Connectors
DisplayPort and VGA connector
Adapter length
8 in (20 cm)
Adapter weight
.1 lbs (.06 kg)
Maximum vertical refresh
rate
85 Hz
Display support
162 MHz RAMDAC
Display max resolution
1600x1200
HP DisplayPort to VGA adapter display resolutions and refresh rates
NOTE: Other resolutions may be available but are not recommended as they may not have been tested and qualified by HP.
Using the HP DisplayPort to VGA Adapter may require an update to the graphics driver installed on your system. To install
the most up-to-date graphics driver go to:
QuickSpecs
HP Compaq 8000 Elite PC
Technical Specifications - Graphics
DA - 13424 Worldwide QuickSpecs — Version 17 — 6/25/2010
Page 40