HP ELITE 8000 - Manual (Page 29)

Antenna HP part number 497792-001
Certifications Wi-Fi certified
Certifications for use
by country United States, Canada, Peru, Taiwan
Intel WiFi Link 5100
a/b/g/n (USDT)
Wireless NIC Wireless LAN
Standards IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n (draft 2.0)
*
* The specifications for 802.11n draft 2.0 are draft specifications and
are not final. If the final specifications differ from the draft specifications,
it may affect the ability of the notebook to communicate with other
802.11n WLAN devices. In countries where n draft 2.0 is not allowed,
this capability is not enabled.
Interoperability Wi-Fi certified (802.11abg only)
Cisco Compatible Extensions Program compliant (802.11abg only) with
Microsoft Windows Vista and XP
Tested with wireless access points from several major manufacturers
Frequency Band 2.4 GHz and 5 GHz
Antenna Structure 1 transmit; 2 receive (1x2)
Data Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (draft): 66 possible data rates, ranging from 6 Mbps to 300
Mbps, depending on the combination of Bandwidth, Modulation Coding
Scheme, and Guard Interval used, as defined in IEEE 802.11n (draft)
specification
Modulation Direct Sequence Spread Spectrum
DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM
Security 1 Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated
AES (support for key sizes of 128, 192, and 256 bits), 802.1x
authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-
MSCHAPv2, LEAP, EAP-FAST.
Support for Cisco Security Features (proven compatibility with Cisco
Aironet infrastructure products through the Cisco Compatible
Extensions Program Version 4) with Microsoft Windows Vista and XP
only.
Sub-channels Multinational support with frequency bands and channels compliant to
local regulations.
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
Network Architecture
Models Ad-hoc (Peer to Peer)
Infrastructure (Access Point Required)
Roaming IEEE 802.11 compliant roaming between access points
Output Power (for
CCK)
2
15 dBm
Output Power (for
OFDM; power varies by
data rate)
2
15 dBm
Power Consumption Transmit: 2.3 Watts (average, with one spatial streams)
Receive: 1.9 Watts (average with two receive chains)
Idle mode
3 : 30 mW (average)
Radio off: 20 mW (max)
QuickSpecs
HP Compaq 8000 Elite PC
Technical Specifications - Communications
DA - 13424 Worldwide QuickSpecs — Version 17 — 6/25/2010 Page 29