Installing the erm in a rack – HP T2200 User Manual
Page 25
Installation 25
1.
Attach the logo badge above the LED/Control panel.
2.
Stand the unit on its side with the LED/Control panel at the top.
Installing the ERM in a rack
Before installing the unit, review and adhere to all warnings provided in "Precautions (on page
WARNING:
To reduce the risk of personal injury or damage to the equipment, be sure that:
•
The leveling feet are extended to the floor.
•
The full weight of the rack rests on the leveling feet.
•
The stabilizing feet are attached to the rack if it is a single-rack installation.
•
The racks are coupled together in multiple-rack installations.
•
Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
This manual is related to the following products: