HP BH3710 User Manual

Page 68

General Notes

Multi Step Process for Individual Server Blade Shutdown

1. Shutdown the Microsoft Windows 2000 operating system. Select Start |

Shutdown.

2. Ensure Shut down is selected from the drop down window menu that

appears. See below. Click OK.

3. Connect to the management blade menu via a Telnet session to the

management blade or using a local serial cable connection to the
management blade port on the bulkhead of the card.

4. Go to Hardware Install -> select your blade according to the slot number ->

Go into More Info. There is a section named Power State, which should say
Automatic -> hit Enter -> select Cycle to power cycle the blade.

Upgrading the BIOS on the bc1100 Server Blade

The bc1100 Server Blade contains BIOS firmware that can be upgraded. For the
latest version, go to

http://software.hp.com/blade-servers/#firmware

and select the BIOS

FW button found on this Web page to download the most recent version of BIOS
firmware. Instructions for the installation procedure are also located on this Web
page.

This manual is related to the following products:

BH3700 BH7800