HANNspree MAC-001029 ST48-12A1 - Manual (Page 29)

28
Turning the TV On and Off
1 Press the POWER button on the
remote control or on the TV control
panel. The power LED indicator on the
front of the TV changes from red to
green, indicating that the power is on.
2 Press the POWER button again. The
power LED changes from green to red,
indicating that the TV is in standby (off)
mode.
Selecting Channels
1 Press the CH UP button to increase the
channel number by one.
2 Press the CH DOWN button to
decrease the channel number by one.
3 Enter the specific channel number by
pressing the number buttons on the
remote control. The channel is
displayed on the LCD panel.
CH 33
Power button
Power LED
CH 33
Channel up
Channel down