Quickspecs, Proliant bl30p, Proliant bl30p standard features (manageability) – HP BL30p User Manual

Page 17

ProLiant BL p-Class

ProLiant BL p-Class
Availability Features

Availability Features

Power redundancy:

hot-plug power supplies
redundant AC feeds (requires two power enclosures when using blade enclosures with enhanced backplane
components)
interconnects options and server blade management module share power from both A- and B- side power
buses

Dual-Port Fibre Channel Mezzanine Card for redundant SAN connections
Redundant ROM on each server blade
ECC Memory
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)

Interconnect Switch availability features:

Hot-plug and hot- remove with configuration retention and no need to cable/re-cable
Two network connections per BL30p server blade routed to independent interconnect switches
Redundant Ethernet inter-switch communication with two sets of redundant Ethernet uplink ports per each
interconnect switch
Redundant front panel ports per each interconnect switch for diagnostics, management, and additional uplinks
Redundant serial ports
Compatibility with PVST+ (GbE2 switch) and 802.1D Spanning tree protocol support for loop-free path redundancy
Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing and failover
Redundant configuration files and operating system firmware images in memory (GbE2 switch)
Redundant fans per each interconnect switch
Redundant power to each interconnect switch
Support for ProLiant network adapter teaming
Redundant configurable community strings and SNMP trap manager hosts
Redundant configurable syslog server, DNS server, and default gateways (GbE2 switch)

Security

Power-on password
Administrator's password
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
Interconnect switch multilevel user names and passwords, management interface time out period setting, SSH*, SCP secure
copy protocol*, port-based IEEE 802.1Q tagged VLANs, RADIUS user authentication and authorization*, and IP address
restriction

NOTE*:

NOTE*: GbE2 Interconnect Switch only

Minimum Rack

Minimum Rack
Requirements

Requirements

Mounts in ProLiant, and Telco racks and Third Party racks that meet the following criteria:

Compatible with 19-inch Standard EIA rail sets
EIA rail-to-rail depth is 29 - 30"
Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear RETMA rail to
rear door, inclusive in the 36-inch overall depth)
Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration with patch
panel)
Must be capable of supporting 1600 lb (for full rack configuration)
Perforated front and rear doors to accommodate front-to-back cooling
Must have 65% open perforation on server blade enclosure doors to support airflow requirements
Optimized for use with the HP 10000 Series racks

NOTE:

NOTE: If using Compaq 7000 Series rack, Rack Extension Kit and High Air Flow Rack Door options are required.

QuickSpecs

ProLiant BL30p

Standard Features (Manageability)

DA - 11958 Canada — Version 2 — June 29, 2004

Page 17