Health O Meter PROPLUS 2000KL - Manual (Page 3)

2
CAUTION AND WARNING
To prevent injury and damage to your scale, please follow these instructions very carefully.
• To ensure proper operation of the ProPlus® Stretcher Scale, this operation manual should be
reviewed carefully before operation. Keep this manual available for future reference, and also
for use in the orientation of new personnel.
• If the scale becomes damaged, it should not be operated until properly serviced. All repairs
should only be performed by authorized Healthometer® Professional service personnel.
• This scale is designed for static weighing of patients only. No scale should be used for
patient transfer. Healthometer® Professional / Pelstar LLC assumes no responsibility
for patient injury or scale damage should this caution be ignored.
• Do not leave patients unattended while on the scale.
• For accurate weighing the scale must be placed on a flat and stable surface with the locking
screw locked properly and the weighing mechanism not touching the floor.
• For accurate weighing, verify proper operation according to the procedure described in this
manual before each use.
• Do not use in the presence of flammable materials.
• Operating at other voltages and frequencies than specified could damage the equipment.
• If the “LOW BAT” indicator activates, for accurate weighing, replace the batteries or connect
the scale to an AC power source as soon as possible.
• Failure to comply with the following will void scale warranty:
o Do not gas sterilize or autoclave the scale.
o Do not place liquids on top of the scale display console.
o Do not exceed recommended weigh limit of 400 lb/181kg for this
scale.
o This scale contains delicate sensors. Do not bang into doors,
elevators, etc., as damage may result.