Health O Meter HAP200 - Manual

Scale Use
1. Place scale on a flat, level surface. A hard surface is best for
maximum accuracy. Placing scale on a very soft, deep pile rug
may affect the weighing accuracy.
2. Locate zero adjustment control on edge of scale and adjust so
the indicator reads zero.
3. Step on and off the scale to check the "zero" setting. If pointer
does not return to zero, repeat Step #2.
4. Step on scale and position your feet in a manner that will
distribute your weight evenly over the entire scale platform.
Stand still while reading display.
NOTE: It is normal for your weight to vary during a day and
from one day to another. Slight changes in your weight are
generally normal.
If service is required, do not return to your retailer.
For service call Sunbeam Products, Inc. at 1-800-672-5625;
7:30 a.m. to 5:00 p.m. Eastern Standard Time, Monday
through Friday
NOT LEGAL FOR TRADE
Made to our exact specifications in China
Health o meter ® is a registered trademark of Sunbeam Products, Inc.
Distributed by Sunbeam Products, Inc.
117 Central Industrial Row, Purvis, MS 39475
34895
10/01
Health o meter ® Dial Scale Model HAP200
To assist us in serving you, please have the model number and
date of purchase available.
USER INSTRUCTIONS