Health O Meter PROPLUS 2000KL - Manual (Page 13)

12
OPERATION INSTRUCTIONS
4.
Release the hanging loops from the lifter.
Note: The scale is programmed to save the last setting chosen as well as the weight of the
stretcher as tare weight. This enables weighing a number of patients without having to re-
set the scale.
If a weight was added or reduced from the stretcher scale it is required to reset the tare
weight.
Note: To zero the scale by using the ZERO key, take the stretcher off the lifter before pressing
ZERO key. Replace the stretcher after zeroing.
5.
Press ON/OFF key to turn scale off.