Health O Meter HAP301 - Manual

Dial Scale Model HAP301
SCALE USE
1 . Place scale on a flat, level surface. A hard surface is best for maximum accuracy. Placing
scale on a very soft, deep pile rug may affect the weighing accuracy.
2. Locate zero adjustment control on edge of scale and adjust so the indicator reads zero.
3. Step on and off the scale to check the "zero" setting. If pointer does not return to zero,
repeat Step #2.
4. Step on scale and position your feet in a manner that will distribute your weight evenly
over the entire scale platform. Stand still while reading display.
NOTE: It is normal for your weight to vary during a day and from one day to another. Slight
changes in your weight are generally normal.
If service is required, do not return to your retailer.
For information on service or warranty, you can locate an authorized Sunbeam ®
service center by visiting our website at www.healthometer.com; emailing us at:
[email protected]; or calling Sunbeam Products, Inc. at 1-800-672-5625.
To assist us in serving you, please have the model number and date of purchase available.
NOT LEGAL FOR TRADE
Health o meter® is a registered trademark of Sunbeam Products, Inc.
Distributed by Sunbeam Products, Inc. Boca Raton, Florida 33431
Made in China
34741 05/02
150mm
130mm
HAP301 Warranty Inst Sheet 5/9/02 4:52 PM Page 1